Endless Error Code Loop

[16crandle]

Gaming PC will not post or output video with and endless error code loop.

Computer was running perfectly fine today, I was going to install a second hard drive and took it as an opportunity to disassemble my computer and clean the parts. After reassembling, I turned it on and was met with an endless error code loop or 00 - 30 - 4C. I examined the cpu socket and the pins do not seem bent, I reseated the RAM in multiple configurations and nothing seems to work. I also unplugged all SATA devices and my video card and nothing works.

Specs:
Intel i5-7600K
ADATA XPG Z1 @ 2133 Mhz (2 x 8 GB)
ASRock Fatility Gaming K6 Z270
EVGA Nvidia 1050Ti
PowerSpec 650 W PSU
Hyper 212 EVO
PNY 120 GB SSD
WD Blue 1 TB
Seagate Barracuda 2 TB (New HDD)

Steps Taken To Resolve
1. Reseatted RAM in multiple configurations
2. Reseatted CPU
3. Inspected CPU socket and adjusted any odd looking pins

Any help or advice is greatly appreciated.

 

[alexoiu]

Check also the 24 and 8 pin power cable connections, both ends.

 

[16crandle]

I verified that both the 24 and 8 pin connections were good. Still getting the same loop.

 

[alexoiu]

Try testing different power supply, if possible. If still no go, I'd RMA both board and CPU.