Hi guys. I'm working on a new build - just doing research right now and had a question I was hoping the experts of tom's might be able to address. In this over-the-top build, I will have two 480mm radiators each featuring 8 fans in a push-pull configuration for a total of 16 fans. Yes, I know it's unnecessary but that's what I'm going for here.
My question is, is it possible to use a fan splitter, such as the Silverstone CPF04 to connect each rad's fans (8 per rad) to this splitter, then from the splitter to a fan controller that would fit into an HDD bay? I'm thinking of the NZXT Sentry Mix 2 or the Lamptron FC5V3 which both support 6 channels and 30 watts per channel. 1 channel for front intake, 1 for rear exhaust, one for top radiator and another for the side radiator which leaves 2 for potential LED strips or something. The case that makes this possible is the Corsair 900d.
The splitter is supported by a SATA connector to the PSU, AND the fan controller is supported by a molex to PSU.
Lamptron: https://www.amazon.com/FC5-Channel-30W-LED-Controller/dp/B00DQSTP0O
NZXT: https://www.amazon.com/NZXT-Technologies-Sentry-Controller-SEN-MIX2-M1/dp/B00DN3IT7M/ref=cm_cr_arp_d_product_top?ie=UTF8#Ask
Silverstone: https://www.amazon.com/SilverStone-System-Cables-Black-CPF04/dp/B00VNW556I/ref=pd_sim_147_3?ie=UTF8&dpID=41yV5kjgjRL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&psc=1&refRID=ZPFMS94M0V5EZN459E4T
Thanks for your insights!
My question is, is it possible to use a fan splitter, such as the Silverstone CPF04 to connect each rad's fans (8 per rad) to this splitter, then from the splitter to a fan controller that would fit into an HDD bay? I'm thinking of the NZXT Sentry Mix 2 or the Lamptron FC5V3 which both support 6 channels and 30 watts per channel. 1 channel for front intake, 1 for rear exhaust, one for top radiator and another for the side radiator which leaves 2 for potential LED strips or something. The case that makes this possible is the Corsair 900d.
The splitter is supported by a SATA connector to the PSU, AND the fan controller is supported by a molex to PSU.
Lamptron: https://www.amazon.com/FC5-Channel-30W-LED-Controller/dp/B00DQSTP0O
NZXT: https://www.amazon.com/NZXT-Technologies-Sentry-Controller-SEN-MIX2-M1/dp/B00DN3IT7M/ref=cm_cr_arp_d_product_top?ie=UTF8#Ask
Silverstone: https://www.amazon.com/SilverStone-System-Cables-Black-CPF04/dp/B00VNW556I/ref=pd_sim_147_3?ie=UTF8&dpID=41yV5kjgjRL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&psc=1&refRID=ZPFMS94M0V5EZN459E4T
Thanks for your insights!
Facebook
Twitter
Instagram