Epson CX6400

[Guest]

Archived from groups: comp.periphs.printers (More info?)

My computer recognises the USN connection when I switch on
the device at the appropriate point during installation but
cannot communicate with it afterwards. Is this a known
situation and is there a cure?

The O/S is Win98SE.
I have tried different USB sockets (I have 4, all 2.0/1.1
compatible) and I have done complete clean reinstalls
reinstallations a couple of times.

TIA

Alan

 

[Guest]

Archived from groups: comp.periphs.printers (More info?)

Alan Secker <alan@asandco.co.uk> wrote in
news:4082A775.7020107@asandco.co.uk:

> My computer recognises the USN connection when I switch on
> the device at the appropriate point during installation but
> cannot communicate with it afterwards. Is this a known
> situation and is there a cure?
>
> The O/S is Win98SE.
> I have tried different USB sockets (I have 4, all 2.0/1.1
> compatible) and I have done complete clean reinstalls
> reinstallations a couple of times.
>
> TIA
>
> Alan
>
>

I installed CX6400 on an old Win98 laptop with a single USB. No problems.

--
Colin J Denman
N 51º 54' 38" W 00º 29' 45" Elev: 125m
email: mailto:spam@cjdenman.freeserve.co.uk -- use my first name
home: http://www.cjdenman.freeserve.co.uk