Question Epson WF-2750 has no power after removing Print Head to clean it ?

[ToolPunkXS]

So I removed the print head to clean it because no matter how many times I ran the printer maintenance... The test page was coming out funky... When I got back to the printer to install it I noticed there was no power... I realized at this point that I forgot to unplug it in addition to it having no power... So, the question is... Do you think I shorted it? Is there something I can try to get it back?

I tested the wall socket. I unplugged it for ten minutes and held the power as I plugged it back in. I plugged it back in and held the power afterwards. I removed the printer head again and waited and plugged it back in.... There is just no power... Any help is great thank you.

 

[Lutfij]

If your disassembling of the printer was done the right way and that you'd reassembled the laptop in the same order but in reverse, without damaging any connectors/ribbon cables then the printer should be in working order.

Did you follow this guide:

View: https://youtu.be/SuZP14Ks7Os

on disassembly?

 

[ToolPunkXS]

I took it apart very carefully... Yet there is no power at all....

 

[ex_bubblehead]

Well, if you left it powered up when you removed the print head there's a good chance that you shorted something which, if there are any embedded fuses could well have caused one or more to blow.