[SOLVED] Error and no picture after new cpu install 7700k and gtx 1060

[Bavnet]

So I just bought a 7700k i7 and when I started it and all that it won't sense my Gpu or give me anything on my screen and it also with the 7700k kicks the fans off on my 1060 and still gives me no picture. Am also using a liquid cooled system now . Any ideas. Imdesperate.

 

[johnsoner13]

Well, what are your full specs? Mainly what is your current mobo?

 

[Bavnet]

Running a b150m bazooka plus 600w 16g ram just switched to other but when I turn it on with the 7700k the blades on my gpu stop and either way it won't detect an input signal at all

 

[Bavnet]

Well, what are your full specs? Mainly what is your current mobo?

• #3

Running a b150m bazooka plus 600w 16g ram just switched to other but when I turn it on with the 7700k the blades on my gpu stop and either way it won't detect an input signal at all

 

[johnsoner13]

You will need to update the motherboard’s BIOS to one that supports kaby lake cpus

 

[Bavnet]

You will need to update the motherboard’s BIOS to one that supports kaby lake cpus

Idk if it's graphics or not but put my i5 back in and now it's still giving me issues to even keep the graphics card going .idk what to do . Can do bios change but not if I can't even get it to show my screen. Any ideas would be welcomed

 

[Phaaze88]

Take the gpu out, plug the monitor into the motherboard, start 'er up, and then update the bios.
After updating the bios, clear CMOS.