Error code Asrock Motherboard

[SonHo_95]

So this is my first build and i used the Asrock Fatal1ty professional gaming i7. After i plug in everything and try to boot the computer, i got the error code from the motherboard which is 16 19 and 4C. I don't know what happened and want to know if u guys have any idea how to fix it?

Specs:
Cpu:Intel Core i5-6600k
Rams: Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 3200MHz (PC4-25600) C16
Motherboard: Asrock Fatal1ty Professional Gaming i7

 

[alexoiu]

What code getting if starting the board with only CPU and CPU fan installed?

 

[SonHo_95]

What code getting if starting the board with only CPU and CPU fan installed?

I got code 53 now with beeping sound. Actually, i think the code first appear as 00, then 19, then 53 and then stay at 53 with beeping sound

 

[alexoiu]

It's ok. Now install single RAM module. What code getting? Test each slot.

 

[SonHo_95]

It's ok. Now install single RAM module. What code getting? Test each slot.

After tested all 4 slots, they all have the code jumping from 00, 19, 00,4c constantly, without any noise. Also, there a red-light at the bios

 

[alexoiu]

Try removing the CPU and posting here a picture of the socket.

 

[SonHo_95]

Try removing the CPU and posting here a picture of the socket.

 

[alexoiu]

Pins look ok. Try reinstalling the CPU, CPU cooler, single RAM module and test. Make sure that the RAM is properly inserted.

 

[SonHo_95]

Pins look ok. Try reinstalling the CPU, CPU cooler, single RAM module and test. Make sure that the RAM is properly inserted.

Still the same error code. Does it have anything to do with the cpu cooler? because my backplate for the cooler went missing now so i don't use the cooler at the moment. Is that what supposed to cause the problem?

 

[alexoiu]

It could be that the CPU gets too hot and shuts itself off for protection. Try testing after installing the cooler.

 

[SonHo_95]

It could be that the CPU gets too hot and shuts itself off for protection. Try testing after installing the cooler.

Yeah now i get code 00 with either the one ram installed or not at all,same result. And no signal transfer to the monitor, the usb keyboard doesn't seems to connect either

 

[alexoiu]

Can you post a picture of the motherboard (so that connections can be seen)?

 

[SonHo_95]

Can you post a picture of the motherboard (so that connections can be seen)?

 

[alexoiu]

Have you connected the pump to the CPU_Fan, or to the CHA_Fan connector?
Connect it to the CPU_Fan (now I see that there is no fan connected to the CPU_Fan).

 

[junkeymonkey]

could be the memory ? like said here

http://forum.asrock.com/forum_posts.asp?TID=1530&title=z170-oc-formula-error-53-memory

may try a latest bios or may need another brand / series of memory for compatibility like that guy did and got it going ?


maybe trade it in for

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231914

its on the tested list as one of the few 2x8 kits in your boards memory supported list ?

also may check your cpu cooler mounting if incorrect like tightened too much or crooked can cause memory issues [google that up to see]

 

[SonHo_95]

Have you connected the pump to the CPU_Fan, or to the CHA_Fan connector?
Connect it to the CPU_Fan (now I see that there is no fan connected to the CPU_Fan).

After i connected the fan to the cpu_fan connector, not i gets random error starting from 30 to 39, then jump to 62 and stay there for a while, then jump to 89 then the computer just shut off and reset

 

[SonHo_95]

could be the memory ? like said here

http://forum.asrock.com/forum_posts.asp?TID=1530&title=z170-oc-formula-error-53-memory

may try a latest bios or may need another brand / series of memory for compatibility like that guy did and got it going ?


maybe trade it in for

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231914

its on the tested list as one of the few 2x8 kits in your boards memory supported list ?

also may check your cpu cooler mounting if incorrect like tightened too much or crooked can cause memory issues [google that up to see]

I bought these ram sticks like a month ago so not sure if i can do the trade-in, probably buy some cheap rams to test it out then return

 

[alexoiu]

Have you connected the pump to the CPU_Fan, or to the CHA_Fan connector?
Connect it to the CPU_Fan (now I see that there is no fan connected to the CPU_Fan).

After i connected the fan to the cpu_fan connector, not i gets random error starting from 30 to 39, then jump to 62 and stay there for a while, then jump to 89 then the computer just shut off and reset

If starting the board with no RAMs, what code getting?

 

[SonHo_95]

Have you connected the pump to the CPU_Fan, or to the CHA_Fan connector?
Connect it to the CPU_Fan (now I see that there is no fan connected to the CPU_Fan).

After i connected the fan to the cpu_fan connector, not i gets random error starting from 30 to 39, then jump to 62 and stay there for a while, then jump to 89 then the computer just shut off and reset

If starting the board with no RAMs, what code getting?

53 with beeping sound

 

[junkeymonkey]

''[After tested all 4 slots, they all have the code jumping from 00, 19, 00,4c constantly]'' - 00 Please check if the CPU is installed correctly and then clear
CMOS.

I've see a few guys just here at tons that ended up with bad skylake cpu's as well ? after all else failed they returned there chips and the replacements worked right out of the box as expected ??

I had a asus board that gave fits as long as I only used on stick of memory at default it worked good anything more than that ????? funny thing is I replaced the asus with a asrock and everything that failed to work on the asus worked great on the asrock first boot still today ..

with the asus I used 3 gpu's 3 memory kits [different ] 2 cpu's , 2 hard drives with windows and Linux and after that just cut my losses .

sometimes you just end up with a lemon from any part its just finding out what is the lemon or the issue that sucks and can cost $$ and time + headache

I would look over the boards memory test list and pick up a cheap kit from it to try and see ? make sure your cpu cooler is not mounted in correct and warping the pcb like I said can cause a memory issue

all you can do is do a process of elimination and hope you hit it early

also don't forget 3200 memory is a overclock as well on skylake cpu's you may need to just try one stick as said above and set it all up then add the 2ed I seem th recall xmp was not so good with skylakes as well and maybe buggy where there were some that when using memory over native speeds had issue with them

http://www.technologyx.com/pc-hardware/xmp-profiles-skylake-stability-issues-ces-2016-update/

http://forum.giga-byte.co.uk/index.php?topic=16775.0

http://www.overclockers.com/forums/showthread.php/765770-Issue-booting-XMP-settings-Corsair-Vengeance-LPX-3000mhz


you said you got drdebug error 4C ? may contact asrock support on that seeing its not a listed error code [pages 26-27 manual]