Error Converting One Or More Entries

[Abdu__]

Hi guys! Im using a Thomson TCW7704 router. I have set up a static ip. But i try to open port 3075 sso my nat type could be open in black ops 3. But every time i try it keeps repeating the error message: Error trying to convert one or more entries. You guys know anything about this? Thanks

 

[Ralston18]

Check this recent posting in this forum:

http://www.tomshardware.com/forum/id-2148147/matter-ports-open.html

May give you a lead to go on....

 

[Abdu__]

Check this recent posting in this forum:

http://www.tomshardware.com/forum/id-2148147/matter-ports-open.html

May give you a lead to go on....

I checked it and someone there said i have to change an existing rule. How do i do that?

 

[Ralston18]

Do you have the User Guide/Manual for the TWC7704?

I found this link but you do need to verify:

http://setuprouter.com/router/thomson/tcw7704/manual-1268.pdf

If the above linked manual is applicable, Port Filtering & Forwarding starts on Page 30.

Use the manual while logged into your router to see if you can identify any existing rules and either change or delete as necessary.

 

[Abdu__]

Do you have the User Guide/Manual for the TWC7704?

I found this link but you do need to verify:

http://setuprouter.com/router/thomson/tcw7704/manual-1268.pdf

If the above linked manual is applicable, Port Filtering & Forwarding starts on Page 30.

Use the manual while logged into your router to see if you can identify any existing rules and either change or delete as necessary.

Sorry i picked the wrong router the 4 on the end was additional. Could you find me a TCW770? That could get me forward.
Thanks

 

[Ralston18]

Here is a link to the TCW770:

http://setuprouter.com/router/thomson/tcw770/manuals.htm

However, the screens and processes are very likely to be similar for any given manufacturer or line of models...

After a quick look through that does seem to be the case with the two manuals I found.

 

[Abdu__]

Scratch that i just saw they were the same. Nonetheless i got it working so thank you very much for your help!