Ethernet Not Working

xccp01

Prominent
Aug 18, 2017
1
0
510
I can't install the ethernet driver because it says "Deep Sleep Mode", but this is what i did



So I cloned the hard drive from the pc that ethernet is working and it has the ethernet driver TO the other one pc that ethernet is not working. i did this, then, i checked the computer and still not working.
 
Solution
Open Device Manager by:
1. Go to Start
2. Click Control Panel
3. Choose System and Security
4. Click Device Manager (under System)

Open Network Controller properties by:
5. Double-click Network adapters to expand it
6. Double-click the Realtek Network Controller

Turn off Deep Sleep mode by:
7. Choose the Power Management tab
8. Untick “Allow the computer to turn off this device to save power”

After doing the above, try reinstalling the drivers.

Good Luck.:) Peace.

VJ_Gamer

Commendable
Aug 8, 2017
851
0
1,660
Open Device Manager by:
1. Go to Start
2. Click Control Panel
3. Choose System and Security
4. Click Device Manager (under System)

Open Network Controller properties by:
5. Double-click Network adapters to expand it
6. Double-click the Realtek Network Controller

Turn off Deep Sleep mode by:
7. Choose the Power Management tab
8. Untick “Allow the computer to turn off this device to save power”

After doing the above, try reinstalling the drivers.

Good Luck.:) Peace.
 
Solution

TRENDING THREADS