Ethernet to Coax

[aesthetics00]

I have this unused Netgear WiFi Cable Modem Router

I use DSL is it possible for the ethernet wire of the dsl can be converted to Coax so that I can connect it to my router. because my router doesn't support it. only coax port at the back.

 

[grana92]

To connect a ethernet network via coax cables you would need a converter but it would require two coax cables. And the average price of a converter is around 90 dollars so there's no point actually..

 

[das_stig]

If the DSL is providing DHCP etc ..

1. Connect to the Netgear and switch off firewall, DHCP, basically anything that makes it act as a router and give it a static LAN IP
2. Connect via LAN ports to the DSL

Now you have have a switch and wireless access point for your network. Note that not all routers will let you do this.