Hi, the stock cooler of my FX-8350 performs pretty well, never gets above 57°C at full load, but that thing sounds like a jet engine ready to take off. The CPU is NOT overclocked.
I was just about to order a CM Hyper 212 EVO, because it's much quieter and should make it run cooler as well, but luckily I checked the model number. I live in the Netherlands and found out that there are two CM Hyper 212 EVO versions, standard and EU.
Standard: RR-212E-20PK-R2
EU: RR-212E-16PK-R1
It seems that the standard version has a better fan, but only the EU version is available here.
http://www.coolermaster.com/cooling/cpu-air-cooler/hyper-212-evo/
Fan Speed:
600 – 2,000 RPM (PWM) ± 10%
600 – 1,600 RPM (PWM) ± 10% (EU Version)
Fan Airflow:
24.9 – 82.9 CFM ± 10%
24.9 – 66.3 CFM ± 10% (EU Version)
Fan Air Pressure:
0.3 – 2.7mm H2O ± 10%
0.3 – 1.7mm H2O ± 10% (EU Version)
I'm a little bit tight on my budget right now, so I'm wondering if the EU version with a weaker fan will still keep the FX-8350 cool enough?
I was just about to order a CM Hyper 212 EVO, because it's much quieter and should make it run cooler as well, but luckily I checked the model number. I live in the Netherlands and found out that there are two CM Hyper 212 EVO versions, standard and EU.
Standard: RR-212E-20PK-R2
EU: RR-212E-16PK-R1
It seems that the standard version has a better fan, but only the EU version is available here.
http://www.coolermaster.com/cooling/cpu-air-cooler/hyper-212-evo/
Fan Speed:
600 – 2,000 RPM (PWM) ± 10%
600 – 1,600 RPM (PWM) ± 10% (EU Version)
Fan Airflow:
24.9 – 82.9 CFM ± 10%
24.9 – 66.3 CFM ± 10% (EU Version)
Fan Air Pressure:
0.3 – 2.7mm H2O ± 10%
0.3 – 1.7mm H2O ± 10% (EU Version)
I'm a little bit tight on my budget right now, so I'm wondering if the EU version with a weaker fan will still keep the FX-8350 cool enough?