[SOLVED] EVGA G3 sleeved cables and in cable capacitors

[extreme_noob]

I have a 650W G3 unit, and I'd like to get a set of individually sleeved cables, either from evga or cablemod. From what I've read and from what I can see in the pictures, there aren't any in cable capacitors in either of the sets, but the PSU comes with cables with in cable capacitors. Jonnyguru's review shows 8-9mV worst case scenario 12V ripple (I assume using the included cables). How much greater ripple can I expect from using cables without in cable capacitors?

 

[Mezoxin]

you don't need them , capacitors are mainly put there to have the best ripple values possible in reviews , all they do is improver ripple behaviour by a tiny bit , but without them you will be more than fine

 

[extreme_noob]

you don't need them , capacitors are mainly put there to have the best ripple values possible in reviews , all they do is improver ripple behaviour by a tiny bit , but without them you will be more than fine

By how much would it affect the ripple though?

 

[Mezoxin]

well if you look at something like the ripple measurements of the corsair RMi 850 and the HXi850 on cybenetics
https://www.cybenetics.com/index.php?option=database&manfID=28&volts=1
both platforms are basically the same except for efficiency being higher in the HX
you would find that the RMi fairs better than the HXi by a maximum of 5mV difference due to it having in cable capacitors and the HXi doesn't

 

[extreme_noob]

well if you look at something like the ripple measurements of the corsair RMi 850 and the HXi850 on cybenetics
https://www.cybenetics.com/index.php?option=database&manfID=28&volts=1
both platforms are basically the same except for efficiency being higher in the HX
you would find that the RMi fairs better than the HXi by a maximum of 5mV difference due to it having in cable capacitors and the HXi doesn't

That's a lot smaller than I expected. Thanks.