Evga GTX 780 ACX

[pasimard]

Hello everybody, today I removed my GPU so I could clean it a little bit since it was dusty. Once all the dust was removed, I putted the GPU back on the slot, but I couldnt make the PCI switch to make a "click" sound like it supposed to do. I applied a fair amount of pressure on the GPU while putting it in place, tried my best to lift the switch so it snaps but never a click sound.

Meanwhile, I still pluged everything back in place, started the computer, everything works fine, did few 3D mark. I scored 8662 and I last time I did it, 2-3 months ago, I scored a little more than 10000...

Should I worry ? Leave it like this? Try again and put some Hulk pressure on the Graphic card ?

**My motherboard is the GIGABYTE Z87X-D3H

Thanks

 

[tambeshakunt]

If it is in the slot you can manually lift the lever so that it fits the card.

Make sure you also screw to the bracket.

 

[pasimard]

i did try to manualy lift it a couple of times with quite a fair amount of force...

 

[pasimard]

anyone ? 🙁

 

[Rukeith]

As long as it's in all the way and connects to the case so you can screw it in, there's nothing to worry about. The GPU is in... That's it lol.