Evga Supernova 1000 g2 vs 1300 g2

Status
Not open for further replies.
Solution


Your Gigabyte G1.Sniper 5 motherboard cannot support three GeForce GTX 970 in 3-way SLI mode.

Two GeForce GTX 970 in 2-way SLI mode is all that is possible.

For a system using two GeForce GTX 970 graphics cards in 2-way SLI mode NVIDIA specifies a minimum of a 700 Watt or greater system power supply that has a maximum combined +12 Volt continuous current rating of 50 Amps or greater and that has at least four 75 Watt 6-pin PCI Express supplementary power connectors. (Minimum system power requirement based on...


Your Gigabyte G1.Sniper 5 motherboard cannot support three GeForce GTX 970 in 3-way SLI mode.

Two GeForce GTX 970 in 2-way SLI mode is all that is possible.

For a system using two GeForce GTX 970 graphics cards in 2-way SLI mode NVIDIA specifies a minimum of a 700 Watt or greater system power supply that has a maximum combined +12 Volt continuous current rating of 50 Amps or greater and that has at least four 75 Watt 6-pin PCI Express supplementary power connectors. (Minimum system power requirement based on a PC configured with an Intel Core i7 3.2GHz 130 Watt TDP processor.)

Total Power Supply Wattage is NOT the crucial factor in power supply selection!!! Sufficient Total Combined Continuous Power/Current Available on the +12V Rail(s) is the most critical factor.

Overclocking of the CPU and/or GPU(s) may require an additional increase to the maximum combined +12 Volt continuous current ratings, recommended above, to meet the increase in power required for the overclock. The additional amount required will depend on the magnitude of the overclock being attempted.
 
Solution
Status
Not open for further replies.