Hi, well first of all, i google a lot about it, tried all "common" fixes and after 10 hours gave up. So yeh i currently own a desktop Pc and a Laptop. Some hardware issues with the laptop case, it won't open amymore, made the laptop useless for me. My Desktop Pc only had an HDD. That's why i had the genius idea to take out the SSD from the Laptop and Install it on the Desktop.
I tried it the simple way, just plugged it in, without formatting. The Desktop booted and i got prompted with a Blue Screen. The next few tries didn't even let the PC boot.
The next step was formatting the SSD in a second laptop. Normally formatted it via Windows. Still Bluescreen when plugged into the Desktop. Afterwards i prepared a USB stick with a windows 10 installer, using the Media tool downloadable from the Microsoft Website.
Plugged the normal HDD off, SSD in and tried to install from the stick. The first time i got prompted wih a error message at around 83%. The next times i tried the solutions. I deleted all the existing Partitions, using the Windows tool at first. That resulted in a 1 hour wait, while trying to create a new Partition. I had to cancel it, and started using diskparts.
Diskparts at first gave me an I/O error message when trying to clean the drive. After exiting and trying it again it worked. Used the same tool to create a new Partition and tried it again, but the windows install error persisted. The SSD is a generic one from Kingston, it worked a few hours ago properly while being used on a Laptop. The format is MBR, and appearently my MB doesn't support UEFS booting. I have absolutley no clue what to try.
I tried it the simple way, just plugged it in, without formatting. The Desktop booted and i got prompted with a Blue Screen. The next few tries didn't even let the PC boot.
The next step was formatting the SSD in a second laptop. Normally formatted it via Windows. Still Bluescreen when plugged into the Desktop. Afterwards i prepared a USB stick with a windows 10 installer, using the Media tool downloadable from the Microsoft Website.
Plugged the normal HDD off, SSD in and tried to install from the stick. The first time i got prompted wih a error message at around 83%. The next times i tried the solutions. I deleted all the existing Partitions, using the Windows tool at first. That resulted in a 1 hour wait, while trying to create a new Partition. I had to cancel it, and started using diskparts.
Diskparts at first gave me an I/O error message when trying to clean the drive. After exiting and trying it again it worked. Used the same tool to create a new Partition and tried it again, but the windows install error persisted. The SSD is a generic one from Kingston, it worked a few hours ago properly while being used on a Laptop. The format is MBR, and appearently my MB doesn't support UEFS booting. I have absolutley no clue what to try.