Fan connecting issues

[Turano_1694]

Hello everyone, first i have to say i'm a noob and my english is garbage.

Well here's my issue, i've made an update to my setup a new graphic card and a new cooling system for the CPU.

System specs:
* i7 3370 ivy bridge
*Mother micro-atx MSI H77MA-G43 (2 sys_fan)
*Deepcool captain 120
*Rx 480 8gb
*Case Raidmax Hyperion
2x top Fan (120mm) exhaust
1x front Fan (200mm) intake
1x bottom Fan (120mm) intake for the gpu
1x back Fan (120mm) exahaust for the liquid cooling -connects to the cpu_fan header-

The problem is the new liquid cooling need 1 sys_fan for the pump. And I need to connect the other 4 Fans.

I was thinking to buy 2 splitters:
____ 1 splitter for sys_fan #1: Connect 2x top fans, 1x front fan. And make them work with the temp of the CPU
____ 1 splitter for sys_fan #2: connect 1x bottom fan and the pump. make the fan work with the Gpu temp and the pump not because it connects only with 3 pins so the controll doesen't affect it.


¿Am I right doing it like this? or is there another way because i'm affraid to screw the pump.
Help pls

 

[CountMike]

No, don't mix pump with any other devices and fans. If need be connect it straight to PSU with an adapter. It needs to run full speed.

 

[Turano_1694]

No, don't mix pump with any other devices and fans. If need be connect it straight to PSU with an adapter. It needs to run full speed.

Thanks I'll do as you say a molex to 3pin connector for the pump.

Thanks