Fan setup for fractal design focus g?

[Blitz Blitz]

Hi. Just interesting it's worth to fill that case with fans. There is extra fan places: 2 top, 1 rear, and 1 bottom. What fan size to use 140 mm or 120 mm? What type to use static pressure vs air flow? Brand, model? What is good for silent operation?

 

[Zerk2012]

It depends on what parts your using but in general you can add a 120mm fan to the back of the case and be fine.
More fans does not always mean better cooling.

If you wish to keep the white LED look then adding just this one would do fine.
https://pcpartpicker.com/product/TPjG3C/corsair-case-fan-co9050015wled

 

[Tony_186]

I would put one at the back and top left to exaust the air.
For the fan size i would go with the 120mm and put them from 20 to 50% for lower noise.
The brands I would pick would be Corsair and Thermaltake.
Here are some fans from each:

Corsair:
1.https://www.amazon.com/dp/B01G5I6O4Q/ref=twister_B07843K53J?_encoding=UTF8&psc=1
2.https://www.amazon.com/dp/B076VDWDZ2/ref=twister_B07843K53J?_encoding=UTF8&th=1

Thermaltake:
1.https://www.amazon.com/dp/B014QW98UK/ref=twister_B06XS5KW6H
2.https://www.amazon.com/dp/B01L0OABKS/ref=twister_B06XS5KW6H?th=1

 

[jankerson]

120MM fan in back and it will be fine.

 

[Blitz Blitz]

Thank you guys. My motherboard supports only two system fans, it's 2 x 4 pins. What I need to do if I wanna install 3rd fan in back, or more fans. Thanks again.

 

[jankerson]

Thank you guys. My motherboard supports only two system fans, it's 2 x 4 pins. What I need to do if I wanna install 3rd fan in back, or more fans. Thanks again.

Get a fan splitter.