G
Guest
Guest
I have built a new computer with the following spec
CPU AMD Athlon XP 1800+
Motherboard ASUS A7V266-E VIA KT266A
Hard drive(s) 2 X figitsu PicoBird 16H 40.9GB <--(Raid0)
& 1 X figitsu PicoBird 16H 20.4GB
RAM Crucial 768MB PC2100 DDR
CDRW Aopen CD-RW 32r 12w 10rw
CD/DVD Pioneer 40xCD 16xDVD Int IDE Tray OEM
Sound card Intergrated
Graphics card ATI All In Wonder Radion 32Mb AGP
My problem is when I set up the two 40 gigs on the promise IDE 1 and IDE 2 channels as raid 0. When I try to format them I keep getting the following error log and temporary system hangs
"The description for Event ID ( 9 ) in Source ( Fasttrak ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: \Device\Scsi\Fasttrak1."
After doing some testing i found that the problem was specific to the secound promise IDE channel and what ever hard drive in what ever setup I put on it I would still get the same error. The opposite is true of the first promise IDE channel.
Dose anyone know why this is happening and how it can be resolved?
CPU AMD Athlon XP 1800+
Motherboard ASUS A7V266-E VIA KT266A
Hard drive(s) 2 X figitsu PicoBird 16H 40.9GB <--(Raid0)
& 1 X figitsu PicoBird 16H 20.4GB
RAM Crucial 768MB PC2100 DDR
CDRW Aopen CD-RW 32r 12w 10rw
CD/DVD Pioneer 40xCD 16xDVD Int IDE Tray OEM
Sound card Intergrated
Graphics card ATI All In Wonder Radion 32Mb AGP
My problem is when I set up the two 40 gigs on the promise IDE 1 and IDE 2 channels as raid 0. When I try to format them I keep getting the following error log and temporary system hangs
"The description for Event ID ( 9 ) in Source ( Fasttrak ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: \Device\Scsi\Fasttrak1."
After doing some testing i found that the problem was specific to the secound promise IDE channel and what ever hard drive in what ever setup I put on it I would still get the same error. The opposite is true of the first promise IDE channel.
Dose anyone know why this is happening and how it can be resolved?