Hey all, new here and require some help with my build. First I’ll list the build:
Ryzen 3100
Asrock B450 Pro4F
8GB TF Delta 2 RaM
Kingston 256GB NVME
500W Thermaltake Smart
Gigabyte R9 380 (GPU shortage)
NOT OVERCLOCKED
with all this said, last Pc I built was a P4 so I’m learning as I go! Anyways the problem I’m having is when I run stability tests they always fail. I’ve run Aida/Prime/Intel Burn and it always stops with a hardware failure. Almost instantly. Funny enough it has no issue with the Prime 95 Small FTT test but fails Large and Blend.
I’ve run memtest for 8 hours with NO errors. Please help! The error I get is rounding is 0.5 when it should be 0.4? Or something like that.
pics below of OCCT Failure and related data.
https://ibb.co/LgDfjLC
https://ibb.co/Z2hcwym
https://ibb.co/xf4bVD5
https://ibb.co/gSFfFq2
https://ibb.co/NF1msBz
https://ibb.co/xf4bVD5
SOLUTION: New QVL RAM !! TF ram has compatibility issues for some reason.
Ryzen 3100
Asrock B450 Pro4F
8GB TF Delta 2 RaM
Kingston 256GB NVME
500W Thermaltake Smart
Gigabyte R9 380 (GPU shortage)
NOT OVERCLOCKED
with all this said, last Pc I built was a P4 so I’m learning as I go! Anyways the problem I’m having is when I run stability tests they always fail. I’ve run Aida/Prime/Intel Burn and it always stops with a hardware failure. Almost instantly. Funny enough it has no issue with the Prime 95 Small FTT test but fails Large and Blend.
I’ve run memtest for 8 hours with NO errors. Please help! The error I get is rounding is 0.5 when it should be 0.4? Or something like that.
pics below of OCCT Failure and related data.
https://ibb.co/LgDfjLC
https://ibb.co/Z2hcwym
https://ibb.co/xf4bVD5
https://ibb.co/gSFfFq2
https://ibb.co/NF1msBz
https://ibb.co/xf4bVD5
SOLUTION: New QVL RAM !! TF ram has compatibility issues for some reason.
Last edited: