Question First build and First issue after installing Windows 10.

[Spiteful]

So I just finished my first build and everything went very well. My pc booted up first shot and all system hardware was detected. I installed windows 10 from usb everything fine. After restart I was in OS was working for like 5 mins went into settings looked at display settings all of sudden black screen and getting ez debug VGA led on MB. ItS also switching between cpu led on MB as well. No idea as I am first time builder. All parts are new except for monitor which is a older benque 60 hz.

 

[Vic 40]

What parts in the pc? For psu also maker+model+wattage.

 

[Spiteful]

Ryzen 5 3600
MSI b450 gaming plus max
RTX2060 super
PSU Corsair RM650x
Ripjaws V 16 (2x8) 3600

everything was working fine Got into BIOs 3 separate times after save/restart. I installed windows with no issues. Maybe 5 mins on my desktop screen went black and EZdebug leds lit up. I did turn XMP on and was reading my Ram at 3600 which the MB says does not support.

 

[Vic 40]

What if you test with ram at 3200mhz? If no second XMP profile set it manually.

Have the latest bios? Is pretty recent:"7B86vH6 Release Date 2020-04-24"

Looked at the specs btw and think that 3600mhz should probably work fine.

 

[Spiteful]

So I actually just tried booting it up after leaving it off for 6 hours. Booted right up but once I get into my desktop for a couple mins it goes black and I get the EZdebug led VGA for a min then I get windows log in. It’s only when I log in to windows. I have no idea

 

[Spiteful]

What if you test with ram at 3200mhz? If no second XMP profile set it manually.

Have the latest bios? Is pretty recent:"7B86vH6 Release Date 2020-04-24"

Looked at the specs btw and think that 3600mhz should probably work fine.

 

[Spiteful]

Yep! it was XMP 3200 working good! Thanks