First build problems

[Jacob_118]

So I have an issue I think it may be power supply but since I have a cooler master 5 white case I don't have a case speaker so it hard to tell

When I power on fans run, gpu runs gets a little hot and cpu fan comes on. Will not boot at all.

Mobo-ASUS H110M-A LGA
Ram- 8gbs of ballistix
Cpu- i3 6100
Psu-Evga 650w
Running 125gb ssd
And 1 tb hdd
Gpu- zotac Gtx 970

I have two of the same motherboard switched it and same thing no output even when I bread board cpu fan and mobo come on but no boot

Any suggestions?

 

[spat55]

Which PSU is it exactly? Have you tried pulling the RAM and only using 1 stick at a time in different slots. Try using the integrated graphics too, so remove the GPU and just put the display cable into the motherboard. Also you can reset the CMOS and see.

Also just buy a case speaker they cost $3 why not just get one.

 

[Jacob_118]

Well I haven't had time buying case speaker yet just happen today I'll order one but I've done all except reset cmos don't know how to do that with my board the psu is an evga supernova 650w gold

 

[spat55]

Well I haven't had time buying case speaker yet just happen today I'll order one but I've done all except reset cmos don't know how to do that with my board the psu is an evga supernova 650w gold

Read the manual as I have no idea. Might need to short it.