Hey everyone,
Just did my first PC build and I'm having an issue getting it to POST. Computer fires up and I can see my monitor dimming as if it's about to pick up a signal and then I get no signal detected from my monitor. I tried updating to the latest motherboard bios and it seems to have updated but I'm still getting the same issue. I did notice something while updating the bios, I actually get the Aorus splash screen to pop up for a second when a USB flash drive is plugged in but it goes away and loads a screen "Reboot and select proper boot device". I also tried hitting F12 and delete to try and get into bios setup but it gives me a no signal detected on the screen. This only happens with a USB drive plugged in. With nothing plugged, it goes straight to no signal detected. The USB has the updated bios on it for the motherboard and I used the Q-flash to update the board. I can't seem to figure out what's causing it to not POST. I know I have an older GPU but that was from my previous prebuilt computer that I figured I'll reuse until I can get a better one. Here is list of the parts used. All components are new except the gpu. No operating system on it. Any help would be great, thanks.
Ryzen 5600
Aorus B550 WiFi
G Skill ripjaw V series Ram(2x8GB)
ATI 5970 GPU
Samsung 970 pro M.2 SSD
CX650m PS
Phanteks360A
No OS
Just did my first PC build and I'm having an issue getting it to POST. Computer fires up and I can see my monitor dimming as if it's about to pick up a signal and then I get no signal detected from my monitor. I tried updating to the latest motherboard bios and it seems to have updated but I'm still getting the same issue. I did notice something while updating the bios, I actually get the Aorus splash screen to pop up for a second when a USB flash drive is plugged in but it goes away and loads a screen "Reboot and select proper boot device". I also tried hitting F12 and delete to try and get into bios setup but it gives me a no signal detected on the screen. This only happens with a USB drive plugged in. With nothing plugged, it goes straight to no signal detected. The USB has the updated bios on it for the motherboard and I used the Q-flash to update the board. I can't seem to figure out what's causing it to not POST. I know I have an older GPU but that was from my previous prebuilt computer that I figured I'll reuse until I can get a better one. Here is list of the parts used. All components are new except the gpu. No operating system on it. Any help would be great, thanks.
Ryzen 5600
Aorus B550 WiFi
G Skill ripjaw V series Ram(2x8GB)
ATI 5970 GPU
Samsung 970 pro M.2 SSD
CX650m PS
Phanteks360A
No OS
Last edited: