Hey guys, first post here! I'm setting up my first build and I have this issue:
The pc has 2 zotac minis (pcie 1 &4) and a sapphire radeon (pcie 2).
They're not connected with sli or crossfire, the zotacs are for deep learning so looks like they should work as they are.
Sapphire doesn't need/have cable power while the other two are connected with a single cable to my aerocool psu (850W).
Only sapphire is connected to monitor via dvi.
The system can't send signal to the monitor when all 3 are on the mobo but I managed to view the bios screen when I removed the gpu (zotac) on pcie 1.
Putting it back in, no signal.
Is it because the system checks pcie 1 first before moving on to the next?
I think I've connected that gpu to the monitor before and there was no signal either but I'll double check.
Btw the cpu is a threadripper with 64 lanes so that's most likely not an issue (all pcie lanes combined are 40 plus an m.2)
The pc has 2 zotac minis (pcie 1 &4) and a sapphire radeon (pcie 2).
They're not connected with sli or crossfire, the zotacs are for deep learning so looks like they should work as they are.
Sapphire doesn't need/have cable power while the other two are connected with a single cable to my aerocool psu (850W).
Only sapphire is connected to monitor via dvi.
The system can't send signal to the monitor when all 3 are on the mobo but I managed to view the bios screen when I removed the gpu (zotac) on pcie 1.
Putting it back in, no signal.
Is it because the system checks pcie 1 first before moving on to the next?
I think I've connected that gpu to the monitor before and there was no signal either but I'll double check.
Btw the cpu is a threadripper with 64 lanes so that's most likely not an issue (all pcie lanes combined are 40 plus an m.2)