I've recently built a Pc for the first time and have ran into a problem I can't seem to find any advice for.
Once I power on the PC, it'll run fine for some time, then randomly cut off. When that happens, the LED on the front of my case starts blinking as does my other LEDs, and all fans in the build spin for a second for stopping. Two seconds pass, then they spin again and stop. If I press the power button nothing happens, so I have to turn it off via the power supply switch. Once I turn it back on again, the same problem occurs.
I waited a while to see if the problem resolved, and it did, but some time later the issue happened again. This has happened about 4 times now and I'm really at a loss as to what's happening.
I'm sorry if this has been answered, but I would really appreciate any help on this matter please. Thank you for your time.
Here's my component list:
ASROCK FM2A68M- HD+ motherboard
2 x DDR3 4GB 1600hz Samsung RAM
Cryorig H7 CPU cooler
Gigabyte gv-n730-2gi graphics card
Corsair VS450 PSU
Seagate 1TB HDD
Aerocool Shard Case
Once I power on the PC, it'll run fine for some time, then randomly cut off. When that happens, the LED on the front of my case starts blinking as does my other LEDs, and all fans in the build spin for a second for stopping. Two seconds pass, then they spin again and stop. If I press the power button nothing happens, so I have to turn it off via the power supply switch. Once I turn it back on again, the same problem occurs.
I waited a while to see if the problem resolved, and it did, but some time later the issue happened again. This has happened about 4 times now and I'm really at a loss as to what's happening.
I'm sorry if this has been answered, but I would really appreciate any help on this matter please. Thank you for your time.
Here's my component list:
ASROCK FM2A68M- HD+ motherboard
2 x DDR3 4GB 1600hz Samsung RAM
Cryorig H7 CPU cooler
Gigabyte gv-n730-2gi graphics card
Corsair VS450 PSU
Seagate 1TB HDD
Aerocool Shard Case