First time builder

Dausken

Honorable
Dec 28, 2013
2
0
10,510
Recently I've decided to build my own computer.

I want to play video games around medium-high without any lag and multitask. Trying to keep it pretty cheap since it's my first build. May or may not upgrade stuff at a later time. Just looking for some input to see if it's all compatible 100%, and if someone could come up with something cheaper to replace an item, etc. :3

Here are the specs: http://pcpartpicker.com/p/2rQtk

I did have another computer build, but I know it didn't have the guts this build has.

Thanks! :3
 
Solution

sure but it also matters if you're motherboard is dual channel or quad channel. Dual channel = 2xramsticks usually in a2 and b4. quad channel motherboard = filling all 4 ramslots up with 4 ramsticks

game junky

Distinguished
Well, it is your money and no one can spend it for you. When it comes to my builds, I try to make sure that I don't buy parts that I am going to replace quickly. I would swap to a dual-channel Ram config - everyone has a favorite brand, I am partial to Corsair because I haven't had any compatibility issues. I would also upgrade the processor - you don't need to step all the way up to AMD's flagships like the 8350, but I would get something that you can use for at least the next couple of years without having buyers remorse. I have a buddy with the 6300 and he is not hurting for performance. Also would go with a full ATX motherboard instead of a micro - more spacing usually leads to better airflow and less failures linked to overheating. Downgrade to a Caviar blue - no need to waste the extra $20-30 when there is zero difference in day to day performance. Don't back yourself into a corner by purchasing a power supply that can barely handle the components you're using - 550 should be more than enough but if you skip up to a 700/750 Watt you can have room to crossfire down the road. Also, don't forget that you'll need a disc drive and an operating system. OS is a big dent in the budget that most people forget. Here's my spec based on the above:

http://pcpartpicker.com/p/2rR7u
 

EvgaLover

Honorable
Dec 9, 2013
656
0
11,160

sure but it also matters if you're motherboard is dual channel or quad channel. Dual channel = 2xramsticks usually in a2 and b4. quad channel motherboard = filling all 4 ramslots up with 4 ramsticks
 
Solution