[SOLVED] Fitting Focus gold 650w PSU into Corsair 750r airflow case

[Milesprovus]

The PSU comes with a mounting bracket, but for the life of me can not figure out how to attach it to the case.

 

[Darkbreeze]

Did you mean 750D, because there is no 750R. PSU installs just like any other case.

4 screws from the back of the case into the PSU. I've never seen any ATX, mATX or EATX case that required any special type of bracket to install the PSU.

 

[DSzymborski]

Nor does the SeaSonic manual appear to note any special PSU bracket and I see nothing in the included parts. It's literally just "stick it in the PSU area and put in four screws."

I think you're going to need to link to a picture of what you're looking at. Or a better description of what you're looking at.

The correct case would be helpful as well; are you sure this bracket you're referring to isn't a PSU shroud? It's very important to be specific on model numbers and this is just one of many reasons; precision is extremely important in this hobby.

 

[Darkbreeze]

If you skip to the 1:17 mark in this video it literally shows you what to do.