Archived from groups: rec.games.pinball (More info?)
I have a Cabinet with water damage on the lower edge / corner. What's
is the best matertial to use when bonding and filling the damaged
plywood. I am looking for a material that will both bond what is left
of the plywood and replace the lost material including the "show side".
Will be repainting cabinet when the delam is repaired..
Archived from groups: rec.games.pinball (More info?)
I've used Elmers Carpenter's wood filler, extra strength,
interior/exterior with great results. Comes in a little white tub with
an orange lid.
Readily available at Home Depot.
Archived from groups: rec.games.pinball (More info?)
The epoxy paste that comes in tubes is really good stuff. you cut a
piece off, knead it, and plug the holes. Get the wood version, it's a
little easier to work than the other epoxies. Like plastic wood, but it
cures fast.Scot has it on his site.
Archived from groups: rec.games.pinball (More info?)
"Shazzam" <shazzam@comcast.net> wrote in message
news:WFCIe.197$2w6.27100@news.uswest.net...
> Looking for an alternative to Elmers, like 2 part Bondo... Something
> that activates with a shorted cure time...
Git Rot is a product that would work very well for this application. It's
mostly used in the RV and boating industrries to repair rotten plywood.
"Shazzam" <shazzam@comcast.net> wrote in message
news:WFCIe.197$2w6.27100@news.uswest.net...
> Looking for an alternative to Elmers, like 2 part Bondo... Something
> that activates with a shorted cure time...
>
> Shazzam
>
> --
> Sent via Gamer Newsgroups
> http://www.gamernewsgroups.com
Facebook
Twitter
Instagram