Flashed wrong bios, MB now bricked?

[Beleg_Jr]

Hi,

I bricked my MB....

its a MS-7366 P6NGM-L and after flash the PC will power on, but thats about it, no beeps, no monitor signal

so I was wondering if any1 has any experience with the following items in this picture:
http://bildr.no/image/R1FpT1FE.jpeg

Already bought a new rdy flashed bios chip, but was thinking maybe I didnt need to solder if I combined those two items shown in the picture

Any1 has any recom recommendations or experience with this?

 

[cin19]

Do you try this method from MSI yet? before the BIOS chipset replacement. Make sure get the right BIOS. https://service.msicomputer.com/msi_user/support/TechFAQdetail.aspx?formid=3046

 

[Beleg_Jr]

awsome, I'll give it a go later today 😀

edit: it did not work. I used a flashdrive with a ledthingie, and not even the led turned on... meaning the usb's are not powered?
Tried all my usb exits...

 

[Beleg_Jr]

Solved by using Test Clip with a USB Programmer 😉

http://www.ebay.com/itm/25-SPI-Series-24-EEPROM-CH341A-BIOS-Writer-Routing-LCD-Flash-USB-Programmer-HR-/252479732796?hash=item3ac8f6fc3c
http://www.ebay.com/itm/281857475839?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

$5 dollar fix, no soldering needed 😉

 

[grayher]

Hi,
I have the same problem like you. Your solution looks very smart,
I wil try to solve it like you.
My question: Where is the BIOS-chip locateted on this MB (MS-7366 Ver. 3.1)?
Regards

 

[Beleg_Jr]

http://i240.photobucket.com/albums/ff102/jackthenewbie/bios-chip.png 😉

 

[grayher]

Thanks a lot