Question Flicker

[Hakoda]

Monitor having flickering refresh rate. Idk whre is the problem..
SPECS -
WINDOWS 10PRO
1)CPU - AMD - Ryzen 7 2700X 3.7 GHz 8-Core Processor
2)Motherboard - MSI - X470 GAMING PRO CARBON ATX AM4 Motherboard 3)Memory - Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-4333 Memory 4)Storage - Western Digital BLACK SERIES 1 TB 3.5" 7200RPM Internal Hard Drive 5)Storage - Samsung - 860 Evo 500 GB 2.5" Solid State Drive
6)Storage - Samsung - 860 Evo 1 TB 2.5" Solid State Drive
7)Case - Cooler Master Stryker SE ATX Full Tower Case 8)Power Supply - Corsair - RMx 1000 W 80+ Gold Certified Fully-Modular ATX Power Supply
9)Wireless Network Adapter - TP-Link - Archer T6E AC1300 PCI-Express x1 802.11a/b/g/n/ac Wi-Fi Adapter.10)Monitor - MSI Optix MAG27CQ 27.0" 2560x1440 144 Hz Monitor.11)GPU - PowerColor Red Devil Radeon Rx 5700 Xt

 

[Lutfij]

Are we to go along with the information in your sig space, to be your system's specs? If so, include them in the body of your thread. The reason behind that is if and when someone else with the same issue as you comes across this thread, the answer might be irrelevant once your specs change.

Yes, sig space specs can and always will change over time.

That being said, have you tried uninstalling and reinstalling your GPU drivers? Latest BIOS for your motherboard? Are you manually running the rams at 4333MHz or is it via X.M.P?

 

[Hakoda]

Are we to go along with the information in your sig space, to be your system's specs? If so, include them in the body of your thread. The reason behind that is if and when someone else with the same issue as you comes across this thread, the answer might be irrelevant once your specs change.

Yes, sig space specs can and always will change over time.

That being said, have you tried uninstalling and reinstalling your GPU drivers? Latest BIOS for your motherboard? Are you manually running the rams at 4333MHz or is it via X.M.P?

Had reinstalled GPU drivers idk how to see if rams run at 4333MHz or is it via X.M.P. Also how to check if i have latest BIOS. Also i am running windows 10 pro 64bit. And using display port.

 

[Hakoda]

BIOS

 

[Hakoda]

So as far as i know the mother board is not compitable with my ram speed i found it out only later also i know that when i insert 1 stick in DIMM-A 2 it shows ram but in DIMM-B 2 IT does not show stick at BIOS. only if i insert ram in DIMM- A 2 & DIMM -B 1.