floppy 7in1..need help

lpc

Distinguished
Jan 20, 2004
21
0
18,510
mitsumi 7 in 1 floppy having a hard time installing to mobo asus p4c800 deluxe it comes with a connector that says on it 5v+data,data,grnd......cant seem to find on mobo to plug it tried usb56 on mobo didnt work +from my psu antec 480 used the 4 pin pwr......still noooothing.
could use your help guys........thx.
 

Crashman

Polypheme
Former Staff
The USB cable should be a standard cable, hook the red wire to pin 1 on USB56 and the ground wire on Pin 4, the others go in the middle (forgot the order, read your motherboard manual). That gets the CARD READER ONLY working. The FLOPPY part of the drive still uses a Floppy cable from everything I've read.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>