[SOLVED] Formatting on SSD HEEEELP

Mar 5, 2019
18
0
10
I'm trying to install Windows with USB (I programmed it with MediaCreationTool), and my SSD is not found, so I can't select it, and there's an "Drive not found" error... I plugged on a USB 2.0 and still doesnt work
 
Solution
make sure the SSD is connected to the first SATA port on your motherboard , if this is an M.2 drive try disconnecting all your other drives leaving only the SSD as the only connected drive. if it still does not show up then it sounds like the drive is bad
make sure the SSD is connected to the first SATA port on your motherboard , if this is an M.2 drive try disconnecting all your other drives leaving only the SSD as the only connected drive. if it still does not show up then it sounds like the drive is bad
 
Solution
Mar 5, 2019
18
0
10
Yeaah you did it booii, so, my hdd has Windows... After i install my ssd, can i plug my hdd normaly to save stuff on ssd and Format later?