FPS Problem with a new gaming pc

[WDP Kaiven]

Hello guys, i just built my first gaming PC & i have a problem with it, it seems like it's not working with it's full potential because i'm getting very low fps in games even if i put low graphics. i searched on many forums & websites & tried many things, i reinstalled the OS & drivers but it still the same.
the fps in mafia 3 didn't pass 40 & i tried far cry 4 it was like 20-25 even in low graphics .. league of legends as well it was like 60 fps but it should be like 300++ ...

here is the spec of my PC:
Motherboard: Asus Z170-A
Graphic card: Gigabyte GTX 1070 G1 GAMING 8 GB
Processor: i7 6700k
RAM: Kingston HyperX Predator 16GB Kit (4x4GB) 2133MHz DDR4
Power Supply: Thermaltake LITEPOWER 650W
Storage: SSD 240 GB + HDD 1 TB
OS: Windows 10 pro 64 bit

Thanks in advance for your help !

 

[Frag Maniac]

How are temps and voltages?

That spec should run those games fine. Check to see if your PSU is faulty maybe, in which case it might have fluctuating voltage, especially on the +12v rails.

 

[WDP Kaiven]

How are temps and voltages?

That spec should run those games fine. Check to see if your PSU is faulty maybe, in which case it might have fluctuating voltage, especially on the +12v rails.

Hi, thanks for your answer, i'm a bit new to all this this might sound silly but i don't know much how normal voltages should be?

 

[WDP Kaiven]

How are temps and voltages?

That spec should run those games fine. Check to see if your PSU is faulty maybe, in which case it might have fluctuating voltage, especially on the +12v rails.

oh i just found it in the asus software, it says it's 11.904V in the +12V & 5.1V in +5V & 3.424V in the +3.3V so i guess it's normal

 

[Frag Maniac]

Yeah, 11.9v is OK, but mostly check to see if it's stable. Meaning stays steadily at that, vs fluctuating up and down a lot.

Also how are temps on GPU and CPU? Maybe try running MSI Afterburner while playing with onscreen display enabled.

 

[WDP Kaiven]

Yeah, 11.9v is OK, but mostly check to see if it's stable. Meaning stays steadily at that, vs fluctuating up and down a lot.

Also how are temps on GPU and CPU? Maybe try running MSI Afterburner while playing with onscreen display enabled.

the cpu temperature when in game is like 35-40 & the gpu is 40-45

 

[Frag Maniac]

Those are very good temps. If you find no voltage fluctuations, maybe try reinstalling or updating the GPU driver.

 

[sizzling]

Is your monitor plugged into the gpu and not the motherboard?

Are all your motherboard and GPU drivers up to date?

 

[WDP Kaiven]

Is your monitor plugged into the gpu and not the motherboard?

Are all your motherboard and GPU drivers up to date?

yes it's plugged in the GPU & everything is up to date 🙁

 

[Frag Maniac]

Try running MSI Afterburner in the background while gaming with the onscreen display enabled to see what GPU and CPU usage is in heavy load situations.

 

[WDP Kaiven]

Try running MSI Afterburner in the background while gaming with the onscreen display enabled to see what GPU and CPU usage is in heavy load situations.

the cpu is nt being used completly, like 20-30% only, maybe that's the problem?

 

[WDP Kaiven]

Try running MSI Afterburner in the background while gaming with the onscreen display enabled to see what GPU and CPU usage is in heavy load situations.

oh wow i just noticed that it's just using 0.76 ghz even tho it's 4.0 ghz, is that normal?

 

[Frag Maniac]

...oh wow i just noticed that it's just using 0.76 ghz even tho it's 4.0 ghz, is that normal?

You still talking CPU here? Is that at idle or under heavy game load? If load that is WAY too low.

What is the GPU usage while gaming under load, and is it throttling up and down a lot?

Regarding the CPU, check to make sure the main (24 pin) and CPU (4-8 pin) plugs from your PSU are firmly mounted in their sockets.

Your temps are very good though, so your CPU cooler is probably mounted OK.

 

[WDP Kaiven]

...oh wow i just noticed that it's just using 0.76 ghz even tho it's 4.0 ghz, is that normal?

You still talking CPU here? Is that at idle or under heavy game load? If load that is WAY too low.

What is the GPU usage while gaming under load, and is it throttling up and down a lot?

Regarding the CPU, check to make sure the main (24 pin) and CPU (4-8 pin) plugs from your PSU are firmly mounted in their sockets.

Your temps are very good though, so your CPU cooler is probably mounted OK.

yes i'm talking about the CPU & it's while i'm in game, it's too low that's true, the GPU usage is like 70% or so

 

[WDP Kaiven]

Oh i actually found the problem, it's the CPU .. the maximum processor frequency is 0.80 ghz even when in game when it should be like 4.0 Ghz & there is many people that got the same problem but there is no viable answer to this 🙁 wish someone could help me

 

[Frag Maniac]

Yeah I figured it was probably a bad BIOS setting. You could just go into the BIOS and set to defaults, then set to XMP to make sure your rated RAM frequency is used. That alone might fix it. If not, bump the CPU multiplier up until it's at it's rated base speed.

 

[WDP Kaiven]

Yeah I figured it was probably a bad BIOS setting. You could just go into the BIOS and set to defaults, then set to XMP to make sure your rated RAM frequency is used. That alone might fix it. If not, bump the CPU multiplier up until it's at it's rated base speed.

how can i change the multiplier?

 

[Frag Maniac]

how can i change the multiplier?

I've included a link to the pdf version of your manual if in case you don't have one. http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/Z170-A/E10611_Z170-A_UM_V2_WEB.pdf

First off, go to page 55 of the pdf manual where it shows how to set defaults. Page 50 shows how to set XMP to get your rated RAM frequency.

The CPU multiplier is referred to as the CPU Core Ratio on page 70 in the pdf manual. Go to the Ai Tweaker page and set it via the Core Ratio Limit tab for each core. Here's a pic of what it looks like. http://imgur.com/GnrtWYw

MAKE SURE you pay attention to what the Target CPU Frequency says before adjusting the CPU Core Ratio. If it's already listed at the rated CPU speed, leave it alone, or you'll be overclocking it.

 

[WDP Kaiven]

how can i change the multiplier?

I've included a link to the pdf version of your manual if in case you don't have one. http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/Z170-A/E10611_Z170-A_UM_V2_WEB.pdf

First off, go to page 55 of the pdf manual where it shows how to set defaults. Page 50 shows how to set XMP to get your rated RAM frequency.

The CPU multiplier is referred to as the CPU Core Ratio on page 70 in the pdf manual. Go to the Ai Tweaker page and set it via the Core Ratio Limit tab for each core. Here's a pic of what it looks like. http://imgur.com/GnrtWYw

MAKE SURE you pay attention to what the Target CPU Frequency says before adjusting the CPU Core Ratio. If it's already listed at the rated CPU speed, leave it alone, or you'll be overclocking it.

yeah i had this Manuel it came with the mobo.. & i tried all these things but nothing changes.. it's still running with only 0.8 ghz u_u

 

[Frag Maniac]

yeah i had this Manuel it came with the mobo.. & i tried all these things but nothing changes.. it's still running with only 0.8 ghz u_u

Are you sure you're saving the changed settings before exiting the BIOS?

 

[WDP Kaiven]

yeah i had this Manuel it came with the mobo.. & i tried all these things but nothing changes.. it's still running with only 0.8 ghz u_u

Are you sure you're saving the changed settings before exiting the BIOS?

yes, when you quit from BIOS the button is Save & Exit so it's saving it

 

[Frag Maniac]

...yes, when you quit from BIOS the button is Save & Exit so it's saving it

Well I would look to see if there's an update for the BIOS that may solve the problem. I found a few people via searches that had similar problems. Maybe ask ASUS about it too. It certainly isn't a common problem with that CPU, so I would suspect the MB.

If an update won't fix it or it's already the latest version, maybe try RMAing it.