Fractal Design Define C

[yanniskyriakopoulospriv]

I'm planning on building a custom loop inside the FD Define C. I have a GTX 1060 Gaming X 6GB and why I'm telling you this, is because I'm not sure if a NexXxoS XT 45 will fit in there. Will a 45mm rad fit inside the Define C with that card? I think the card is about 28cm. Thanks in advance!

 

[Barty1884]

The Define C has 315mm length-wise for a GPU, with the stock front fans mounted.
http://www.fractal-design.com/home/product/cases/define-series/define-c

The stock fans are Fractal Design Dynamic X2 GP12, which are 25mm thick.

So, there's 340mm of 'length' between the GPU bracket at the rear, and front of the case.

The GamingX 1060 is 277mm.


277mm + 45mm for the Rad is 322mm, so they'll both 'fit'.
Leaves you <20mm for fans though.

 

[yanniskyriakopoulospriv]

So you if it leaves me 20mm for the fans that means they wont fit. So i guess I'll go for the Nexxxos ST30. Do you agree?

The Define C has 315mm length-wise for a GPU, with the stock front fans mounted.
http://www.fractal-design.com/home/product/cases/define-series/define-c

The stock fans are Fractal Design Dynamic X2 GP12, which are 25mm thick.

So, there's 340mm of 'length' between the GPU bracket at the rear, and front of the case.

The GamingX 1060 is 277mm.


277mm + 45mm for the Rad is 322mm, so they'll both 'fit'.
Leaves you <20mm for fans though.