Freestyle Scratchbuilt Bench Build A.K.A. The 8 Hour Challenge

dieseldog49

Distinguished
Aug 31, 2011
101
0
18,680
Hey guys, so I snagged a bunch of stuff at the Dangerden Fire Sale (Sad to see them go :sad-smile ) and I was jazzed with all of these parts headed my way and I was in the "modding" mood. However I am waiting on parts for my Bombproof Builders Desk and my Wall PC build. So knowing I needed a new benching station (traded away my Dimas) I got a crazy idea, build a bench from scratch and only give myself 8 hours to do it! Not only that but I decided I had to use free and found parts as much as possible and I had to make it up as I went along. No sketches, plans or CAD layouts. But wait theres more! I also decided I could not make any measurements, I would have to find templates or eyeball it, the only thing I could use was a strait edge, everything else would be improvised or found objects.

Now why would I put all of these totally unnecessary "limits" on myself? Well several reasons

1. If it isn't hard it's not worth doing. I live for challenge and its one of the main reason I build PC's.

2. To shake things up! I currently have my next 5 Desk/Case/Scratch builds planned out extensively (which by the way should end up being about 2 years worth of builds :thumb: ) But I can only take those on one at a time and between work, cashflow and life there can be stretches where I dont even get to work on them. By playing playing by an entirely different set of rules I force myself to think and create in entirely new ways and explore the dynamics of my creative proccess.

3. Success Teaches us nothing, We only learn from failure. I knew going into this build with these rules I was going to screw things up, but thats the beauty of this build is that every mistake I made i had to adjust to and improve upon. Even this far in I have already come up with a ton of better ways to work with my builds and perfected some of my techniques along the way.


DISCLAIMER: This is a build for the fun of it. It in no way reflects my standards for regular case modding or scratchbuilding I am just having a good time and taking the attitude of as long as it fits we're good.


Ok so lets get into this build, the platform I am going to be using is a piece of scrap plywood from my desk build. I took a broken Asus Z68 Deluxe mobo and used it as my template for my standoffs. I then drilled the holes and threaded my standoffs in very very carefully :weirdsmil

First 4 in

IMG_20121101_155108.jpg


IMG_20121101_155113.jpg


IMG_20121101_155119.jpg



Pretty happy with how it lined up

IMG_20121101_155135.jpg


Then the Rest, not perfect but close enough (30 minutes in)

IMG_20121101_160205.jpg


IMG_20121101_160314.jpg


But dont think I have forgotten the mATX boards!

IMG_20121101_161036.jpg


Bah one standoff short

IMG_20121101_161039.jpg



Now we need to mark out some cable management holes

IMG_20121101_161953.jpg



And its off to the Sawhorses!

IMG_20121101_164810.jpg


 
Very nice work there. I'm interested to see where this go's.

Any 5.25" bays to be added? I imagine a quick way to put them in would be to have some right angle brackets screwed to the board and use an optical drive to figure out how far apart they need to be and where the screws go.
Also 2.5" SSD support, essential for any modern system.

Dont think you can have that many images on the one post, need to split them along multiple.
 

dieseldog49

Distinguished
Aug 31, 2011
101
0
18,680
Rough left side cut

IMG_20121101_180024.jpg


Cleanin up

IMG_20121101_180027.jpg


Side Cut for the right

IMG_20121101_180715.jpg


Cleaned up a bit

IMG_20121101_180724.jpg



Figuring out where I need to drill my mounting holes

IMG_20121101_181147.jpg



Test fitting

IMG_20121101_182625.jpg



Where I am at 2 and a half hours of work

IMG_20121101_184932.jpg

IMG_20121101_190226.jpg




Next steps

PSU Mount
HDD mounts
PCIE Bracket
Router the Edges
fix some of the wood imperfections
Power and Reset Switches
USB ports
a Coat of High Gloss paint.
 

dieseldog49

Distinguished
Aug 31, 2011
101
0
18,680
First one was pretty rough

IMG_20121101_164813.jpg



But with the second one I had gotten it pretty close to figured out

IMG_20121101_165924.jpg


Third one was as close to perfect as I think I can get freestyling it

IMG_20121101_170132.jpg


Now to the first leg, using 2x6 scraps from closing in my carport, didn't even cut them to fit this. (70 minutes in)

IMG_20121101_171313.jpg



Pre-drilled then screwed in the leg

IMG_20121101_172130.jpg


But then inspiration hits (I blame the Jawas, Utini!)

IMG_20121101_172348.jpg


IMG_20121101_172646.jpg


Beer decided to explode from vibration

IMG_20121101_173320.jpg


Next up we have the 360mm rad cutout (thats right I am going for the gold here) (110 Minutes in)

IMG_20121101_173547.jpg


IMG_20121101_174552.jpg


 

dieseldog49

Distinguished
Aug 31, 2011
101
0
18,680
Ok guys, here is part 2 of the bench build and the next 2.5 hours leaving me 3 hours to finish it. I did in the meantime get to put the bench into service early as I needed to test 32gb of ram but I did not want to take my main system down running ramchecks for 2 days, I am happy to say everything fit perfectly.

IMG_20121202_161205-1.jpg


Lets get to it.

First off was sanding my joints between the 3 pieces of wood to minimize the gaps and make sure I use the least amount of wood filler possible, however I dont have any pictures of me beltsanding as I had no one around to snap a pic. Here are some pics of the results though.

IMG_20121202_171246-1.jpg


IMG_20121202_171628-1.jpg


IMG_20121202_171639-1.jpg


Next up was routering the edges so splinters wouldnt be an issue, I also did this for the cable management holes. (once again no pictures of me actually doing the work cause)

IMG_20121202_175941.jpg


Not totally happy with how the edges turned out but with a couple more passes of the router and some sanding by hand they should be good to go.

After that it was on to setting up my solution for mounting the PSU. I feel I came up with the simplest and most functional solution for this design. First I needed to trace out my hole, once again I am not using any measuring tools other than a 12 inch metal ruler. Then I drill out some pilot holes for my jigsaw.

IMG_20121207_163352.jpg


Next up is cutting out the template I have set up.

IMG_20121207_163803.jpg


IMG_20121207_164112.jpg


Then to the key to my PSU setup, a Lian Li PSU extension.

IMG_20121207_165400.jpg


IMG_20121207_165405.jpg


Screw that in then its time to mount my power and reset switches.

Drill out my first hole and test fit the switch

IMG_20121207_172237.jpg


IMG_20121207_172243.jpg


However the wood is thicker than the switch so I have to bore out the bottom so the mount ring can screw on. I used a router for this.

IMG_20121207_173915.jpg


IMG_20121207_173926.jpg


bang out the second one and we have to great looking switches.

IMG_20121207_174320.jpg


IMG_20121207_203532.jpg


Also for those wondering what the spacing is on the PSU here is a pic to show the clearance I will have for cable management at the bottom of the mobo

IMG_20121207_204139.jpg


I also picked up a steel powdercoated radiator grill for this build as well.

IMG_20121207_205352.jpg



Well I have 3 hours left for the challenge and I have to get the following things done,

Disk and hard drive mount

PCIE Support

Pump and reservoir mounts

holes for tubing

Sanding and some extra routering

Putting a stain or paint job on this bad boy


Thanks for following this build guys, I am really enjoying going back to basics with this one and having alot of fun with it. Please let me know what you think!
 

dieseldog49

Distinguished
Aug 31, 2011
101
0
18,680
Was going to finish the bench yesterday but....

IMG_20121215_184204.jpg


Smashed my finger between the crank for my enclosed trailer and my trucks tailgait, cut goes almost all the way through the finger. So no real updates until thats healed up a bit.