Freeze at welcome screen. Safe mode works.

[Oscarownage]

I am currently asking this on Safemode with networking. My PC freezes at the welcome screen, Actually now it gets a black screen with movable cursor after boot menu Instead of that and the cursor Freezes after a minute.

I have run Check Disk, Malwarebytes, Temps are fine, Fan speed ran. Registry cleaned. So on. Anyone got a fix? Ask away if you need more details

 

[alexoiu]

I'd try uninstalling the graphics driver while in safe mode or restoring the system to a previous state. Did it work, or is it a new setup with an old HDD?

 

[Oscarownage]

I'll try the 1st Solution. Also i have restored but to no avail. There was a Windows update 9 days ago but i have been able to use the PC since then.
I have new everything. It's a new system. Also running a 7850 if that helps

 

[alexoiu]

OK. Post back if not working.

 

[Oscarownage]

OK. Post back if not working.

Did a complete Video card wipe, Absolutely no Change in the slightest. Black screens after the Windows Sign does the weird animation thing saying "Starting windows" Cursor able to move for 30 seconds before system completely freezes.

 

[alexoiu]

Can you reinstall (you can back up the needed data while in safe mode before reinstalling)?

 

[Oscarownage]

Can you reinstall (you can back up the needed data while in safe mode before reinstalling)?

If you are talking about windows. Not really. The amount of data i'd ideally need to keep exceeds 120 Gb.
Plus i have no disc available to do that

 

[alexoiu]

You can make an additional partition (if only C on the HDD, make a D partition and save the data there).

 

[Oscarownage]

You can make an additional partition (if only C on the HDD, make a D partition and save the data there).

Already have 2 partitions. Although i could move all my C drive data over onto there, You think that would work?
They are seperate HDD's btw

 

[alexoiu]

If enough room on the second HDD, move data there, then reinstall Windows on C (the OS drive).
Try firstly repair. If not working, reinstall.

 

[junkeymonkey]

new windows install? you may not have the right updates yet and there not comming in there correct and proper order

 

[junkeymonkey]

new windows install? you may not have the right updates yet and there not comming in there correct and proper order