[SOLVED] Freezes when saving settings in BIOS

[indigo1371]

Greetings. I have a Gigabyte motherboard, before that there were two 2133 MHz RAM modules. Then I took them out and installed the new 2666MHz ones from Crucial. Then in BIOS from 2133 I increased it to 2666 MHz, the settings were saved, but when I wanted to change the amount of video memory on the integrated graphics, then when saving and exiting the BIOS, the BIOS freezes, only a reboot helps. I was thinking of removing the battery from the motherboard, but will it only remove overclocking from the RAM? Or will it be easier for me to update the motherboard? Now stands f50 and there are updates to f60c. but I'm afraid that BIOS freezes can ruin everything.

 

[usernamemustbeunique@123]

can u add details of ur hardware

 

[indigo1371]

can u add details of ur hardware

Yes)
Windows10
Ryzen 3 2200G
2x4 Crucial 2666Mhz
Gigabyte B450M DS3H
PSU 450W
Hdd 1tb Toshiba
That's all)

 

[rickypicky5]

Go to bottom of page 18 - CLR_CMOS and follow the instructions. Make sure you turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values.

After that, if it boots, verify all your RAM is being recognized and see what speed it's running at. It may automatically run your RAM at it's rated speed.

 

[indigo1371]

Go to bottom of page 18 - CLR_CMOS and follow the instructions. Make sure you turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values.

After that, if it boots, verify all your RAM is being recognized and see what speed it's running at. It may automatically run your RAM at it's rated speed.

thank you very much)