freezes with a new build.

[aaron253]

Ga-990FXA-UD3 mb/Sapphire HD7850 OC edition/AMD 8120 8core cpu/850 Corsair PS/WD 500GB 10k rpm HDD/aftermarket cpu cooler w/2 120mm fans/16GB 1600MHz RAM. Tower has total of 2-200mm & 6-120mm fans , not counting the 2 smaller on the GPU. I have tried with both Windows 8.1 and also 7 Ultimate . My GPU is getting very hot and freezing my manuverability in games, both FPS and others like Warthunder. What shld I do? help plz.

 

[Gate9er]

How many fans does your case has? A picture would be helpfull..

 

[a1blaster]

my pc has a terrible ventilation and my room temp is high but i never had problems with freezing etc....i think your problem is a faulty driver, corrupted windows or virus

 

[Gate9er]

my pc has a terrible ventilation and my room temp is high but i never had problems with freezing etc....i think your problem is a faulty driver, corrupted windows or virus

Well he said that he used both win 8.1 and 7, so let's assume that he made a clear windows installation..

 

[a1blaster]

its hard to troubleshoot freezing because every hardware component inside your pc can cause freezing...

 

[aaron253]

I do have a 120mm fan mounted onto the side panel , and I have a 120mm blowing from the front onto the HDD in the bays above the front 200mm fan , and the 200mm fan in the top of the tower. When I heard that AMD runs hotter than intel , I bought the Coolermaster Haf Advanced series midtower and added a 120mm fan inside the case at front to assist the slower rpm 200mm fan for intake. Since yesterday I have tried for kicks to lay a 80mm and a 120mm fan directly on top of the GPU's Mb which is keeping the card cool to the touch , but i still have the mouse lag. So, after trying the lay-on fans , my entire tower is cool atm , and does that rule out the GPU , or cld it still be the culprit? : (. Sorry I cant figure out how to place pic or logs onto here. I built this one from scratch and since it was all new except for the memory , I cant figure out what the problem is. I did a Furmark test and the temp got up to 73C. thats the highest.
And yes , I have done at least 6 or 7 clean installs in the past 6.5 weeks.