Frequent BSOD after hardware upgrade

[korgproductions]

So i've been upgrading from a regular sata ssd to a m.2 WD Black 256GB and from a Radeon R9 390 to GTX 1070, did fresh installation of windows and updated drivers aswell as windows update. Problem still remains.

NOTE: The PC was running just fine until i swapped the parts out.

BSOD i get is
KERNEL_SECURITY_CHECK_FAILURE
DPC_WATCHDOG_VIOLATION
DRIVER_ERQL_NOT_LESS_OR_EQUAL

Been checking youtube and other pages for possible solutions without result. So my question is, is it a driver related issue or hardware related? To me it sounds really wierd if hardware got damaged during installation of the new parts since i'm extremley careful when i change parts.

Rest of setup is
i5 8400
MSI Z370A Pro
16GB ddr4 Ballstix Sport
Corsair HX750 PSU
3TB WD Blue (new)
Corsair k65 rgb
FiiO Olympus 2 DAC
Beyerdynamics DT770 Pro
Blue Snowball mic

Let me know if you need anything else.

 

[Calvin7]

WD Black 256GB

I wouldn't know if your using a WD Black PCIe SSD (2017) or some other drive based on your description.
https://www.wdc.com/products/internal-ssd/wd-black-pcie-ssd.html

Procedures to use NVMe drives differ from regular SATA drives.

 

[korgproductions]

It's the one you linked

Also got a small update, i did run Aida64 for about 10h now where i tested cpu, gpu and ram with no BSOD during the time testing.

 

[korgproductions]

Update:

After troubleshooting some more i found that the network adapter might not be working properly so i went into Device Manager and uninstalled the network adapters that i could find there. Restarted my PC and ran Aida64 for about 12 hours without getting any BSOD. Current system uptime is 22 hours and have been working just fine.

Highest chance to BSOD was when watching youtube/twitch while playing, been playing for a couple hours now with both twitch and youtube on in the background, no crashes.