Fresh install on new Ryzen 3 2200G install freezing

[mdimos187]

Hey all just finished building a budget Ryzen 3 system,
- Antec VSK3500 Micro ATX Case with 500W PSU
- Ryzen 3 2200G APU
- ASRock A320M-HDV Motherboard with the latest version 4.80 bios update
- 4GB Crucial 2400MHz Ram
- WD Blue 1TB 3.5" 7200RPM HDD

It boots up and posts to the UEFI fine. My ram and HDD are showing, but when I try boot from my genuine Windows 10 USB it gets to the Windows logo and freezes

I have also made a new bootable ISO of Windows 10. It is the primary boot device. Still freezing once the Windows 10 installer starts loading. Could it be a faulty ram stick?

Thanks in advance.

 

[Colif]

download memtest86 on another PC and lets see if it is ram.
run it up to 8 passes, any error count higher than 0 is too many and your guess is right.

another choice is check hdd - https://support.wdc.com/downloads.aspx?p=2

 

[mdimos187]

Going to try another stick of ram from a mates PC tomorrow and go from there. Thanks for the reply!

 

[mdimos187]

Ended up buying another stick of 4GB Crucial 2400MHz Ram, tried it on its own and with the original stick (2x 4GB). Still having the same issue. Any ideas?

 

[Colif]

I moved post to systems as I don't think this is a windows problem (not after 2 different ISO used)

Did you test hdd?

 

[mdimos187]

I had to disable IOMMU in the bios. Works fine now.

 

[neuroactive]

Mdimos, **** thank you for that answer. Working great now!