Hi! 
A couple of months ago I have done a motherboard switch and also installed a new CPU and a new ram stick.
Since then I have been getting Memory Management BSOD errors but after the error I could boot back into Windows and everything was fine.Recently I started to get the Memory Managament error a lot more frequently which got windows into an automatic repair loop but I managed to fix that following this tutorial:http://
Everything worked just fine until now when I got the Memory Management BSOD error again and as soon as Windows loaded (or even before that) I kept getting the error.
I tried reinstalling windows 10 but after the installer was done with the first phase of the installation and restarted the PC I got the error again.Finally after a few tries I was able to finish the installation but after I had spent a few minutes in windows it froze and it would not react to anything so I pressed the restart button on my case.After that it only booted until the windows 10 logo and the loading animation below it but it doesn't load any further no matter how long I wait.
I have also got the irql_not_less_or_equal BSOD error.
I used Driver Booster and CCleaner. (but I definitely won't after this)
What I have done so far:
I ran the Memory Diagnostic when I was still able to boot into Windows 10, but it showed no errors.
I have flashed the BIOS.(Although I already had the latest version)
I have run memtest86 which have not found any errors.(2 passes)
I have run Western Digital's Data Lifeguard Diagnostic for DOS.No errors were found.
Tried installing windows without internet connection.
My PC:
OS : Windows 10 Pro x64
Motherboard: GA-970A-DS3P (rev. 2.x)
GPU : GeForce GTX 670
CPU : AMD FX 6300
RAM : J&A 8GB DDR3 1600 MHz
HDD : Western Digital 500GB
Power Supply: Deepcool 500W DN500
Thanks everybody for your help in advance!
A couple of months ago I have done a motherboard switch and also installed a new CPU and a new ram stick.
Since then I have been getting Memory Management BSOD errors but after the error I could boot back into Windows and everything was fine.Recently I started to get the Memory Managament error a lot more frequently which got windows into an automatic repair loop but I managed to fix that following this tutorial:http://
Everything worked just fine until now when I got the Memory Management BSOD error again and as soon as Windows loaded (or even before that) I kept getting the error.
I tried reinstalling windows 10 but after the installer was done with the first phase of the installation and restarted the PC I got the error again.Finally after a few tries I was able to finish the installation but after I had spent a few minutes in windows it froze and it would not react to anything so I pressed the restart button on my case.After that it only booted until the windows 10 logo and the loading animation below it but it doesn't load any further no matter how long I wait.
I have also got the irql_not_less_or_equal BSOD error.
I used Driver Booster and CCleaner. (but I definitely won't after this)
What I have done so far:
I ran the Memory Diagnostic when I was still able to boot into Windows 10, but it showed no errors.
I have flashed the BIOS.(Although I already had the latest version)
I have run memtest86 which have not found any errors.(2 passes)
I have run Western Digital's Data Lifeguard Diagnostic for DOS.No errors were found.
Tried installing windows without internet connection.
My PC:
OS : Windows 10 Pro x64
Motherboard: GA-970A-DS3P (rev. 2.x)
GPU : GeForce GTX 670
CPU : AMD FX 6300
RAM : J&A 8GB DDR3 1600 MHz
HDD : Western Digital 500GB
Power Supply: Deepcool 500W DN500
Thanks everybody for your help in advance!
Facebook
Twitter
Instagram