[SOLVED] Front panel cabels dont seem to go in motherboard! HELP!!

[romethaug28]

I am building my first PC. My motherboard is Lenovo m91p Thinkcentre on (link: https://www.amazon.com/Lenovo-Thinkcentre-M91p-Motherboard-03T8351/dp/B078XGTYLY).
The motherboard´s audio slot says F_audio and the cabel says audio. They arent similar at all. The usb slots are left over with one line of pins (2 pins). And the single cabels like: Power Swich, Reset swich, Power led etc), i cant find place for those either. or there are just too much pin places left over. Am i screwed over?

All help is welcomed!
Thank you!

 

[the_crippler]

Often times, aftermarket cases have all the wires split out mostly individually. (some, will be in pairs with a spacer between them.) IF you look closely at the mobo, you should also see markings by the pins that tell you what they are for. Below is a link to your motherboard's manual. Take a look at page 127.

https://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_pdf/0a23284.pdf

 

[romethaug28]

Often times, aftermarket cases have all the wires split out mostly individually. (some, will be in pairs with a spacer between them.) IF you look closely at the mobo, you should also see markings by the pins that tell you what they are for. Below is a link to your motherboard's manual. Take a look at page 127.

https://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_pdf/0a23284.pdf

hmm, i took a look. it tells that what are these things for, i get it. But it doesnt tell me what to put where. Also the usb slots and audio slot arent the exact same as the mobo´s. Well thank you anyways!

 

[freakshow809]

I am building my first PC. My motherboard is Lenovo m91p Thinkcentre on (link: https://www.amazon.com/Lenovo-Thinkcentre-M91p-Motherboard-03T8351/dp/B078XGTYLY).
The motherboard´s audio slot says F_audio and the cabel says audio. They arent similar at all. The usb slots are left over with one line of pins (2 pins). And the single cabels like: Power Swich, Reset swich, Power led etc), i cant find place for those either. or there are just too much pin places left over. Am i screwed over?

All help is welcomed!
Thank you!

thats the way you conect the front panel https://drive.google.com/file/d/1OUlTC2b7Etjf7CyUOd5F4Bjbd9zoEyAA/view?usp=sharing

20190215_232115.jpg

drive.google.com