[SOLVED] Front Panel Connectors

[TridentProduct]

So I just got all pm PC parts and I got a B450 Aorus PRO WIFI motherboard and did not come with front panel connectors like HDD LED, RESET SW, - PLED, and + PLED also my case (Phanteks 350X) just came with a PWR SW. Is this the company's mistake or just need to buy some front panel connectors?

 

[NightHawkRMX]

Look harder in the case. Try to trace the wires back from the top where the power button is.

 

[rgd1101]

did you read thru the manual?

 

[boju]

From 5:43, there's a lot of wires there and a wire tucked just under the white panel in this frame. Should have them all there somewhere.

Regarding the motherboard headers, look at section 15 for F_Panel.

 

[TridentProduct]

From 5:43, there's a lot of wires there and a wire tucked just under the white panel in this frame. Should have them all there somewhere.

Regarding the motherboard headers, look at section 15 for F_Panel.

I looked everywhere in the case and only found the Power Switch.

 

[TridentProduct]

did you read thru the manual?

Yes, I have read through both manuals. Both does not say that those connectors are included except for the power switch cable.

 

[TridentProduct]

Look harder in the case. Try to trace the wires back from the top where the power button is.

Just did, I could only find the power switch cable,

 

[boju]

I looked everywhere in the case and only found the Power Switch.

Oh ok. I looked at the case manual, and you're right. There is no reset button or hdd led. Looks like you're going to have to be without.

 

[TridentProduct]

Oh ok. I looked at the case manual, and you're right. There is no reset button or hdd led. Looks like you're going to have to be without.

So I need to buy some from online, or just leave it be?

 

[boju]

It's not as simple as that. Could probably get standalone leds and reset switches but where are they going to sit? Could probably drill holes in the case and place them near the front fascia somewhere. A project for sure.

Poor case design if you ask me. Perhaps Phanteks thinks reset button and hdd leds are unnecessary.