FS2004 elevator too sensitivie

[Buck]

Archived from groups: microsoft.public.games.zone.simulation (More info?)

Anybody experienced and/or resolved excessive pitching of
airplane? I have adjusted elevator sensivity and null
zone,but airplane (BE58) still pitches excessively with
extremely small and gentle elvator inputs? I am using CH
Flight Sim Yoke (USB), Windows XP, FS 2004. One minute
climbing at 1500 feet per minute, next minute descending
at 1500 feet per minute! Any help most welcoem. Thanks

 

[Guest]

Archived from groups: microsoft.public.games.zone.simulation (More info?)

"Buck" <anonymous@discussions.microsoft.com> schrubte:

Hello "Buck",

Try to add to the section [CONTROLS] in your fs9.cfg the following line:

stick_sensitivity_mode=0

After that you should recalibrate the joystick and experiment with the
sensitivity settings in the simulator to get best aircraft performance.

Beware that you won't be able anymore to do aerobatics, for you cut off the
range of the ailerons, elevators etc. at least half way.

Kind regards

Thomas
@EDDV

--
http://www.suchanhannover.de

 

[noah]

Archived from groups: microsoft.public.games.zone.simulation (More info?)

Have you by any chance left AutoPilot On?
Also, I've found that the AutoTrim that is found on
some FS aircrft can lead to quirky affects. Turn it Off.

>-----Original Message-----
>"Buck" <anonymous@discussions.microsoft.com> schrubte:
>
>Hello "Buck",
>
>Try to add to the section [CONTROLS] in your fs9.cfg the
following line:
>
>stick_sensitivity_mode=0
>
>After that you should recalibrate the joystick and
experiment with the
>sensitivity settings in the simulator to get best aircraft
performance.
>
>Beware that you won't be able anymore to do aerobatics,
for you cut off the
>range of the ailerons, elevators etc. at least half way.
>
>Kind regards
>
>Thomas
>@EDDV
>
>--
>http://www.suchanhannover.de
>.
>

 

[Guest]

Archived from groups: microsoft.public.games.zone.simulation (More info?)

i have the same prob with gravis joy stick...i have to re
calabrate every startup. but my ch yoke works fine...might
try re calabrating yoke this might help untill a fix comes
along. x