FSB:DRAM is 2:6, DRAM is only 524 but i have 2400Mhz ram ?

[lloydy110]

Hi, i have Consair Vengence Pro 2400Mhz (2x8Gb) DDR3 ram but CPU-Z only shows the frequency at 524 ( x2 = 1048)
I believe that i should have a FSB😀RAM of 2:13 (2400 / base clock which is at 175)

How do i achieve this?

It wont boot if I select X.M.P. despite me trying different dram voltages

i have an I7 920 Bloomfield clcok at 175 ratio is 21
Mobo is a P6T SE

If i manually set the timings to match JEDEC #4 i get frequency of 539,
if i manually set timings for the XMP shown in the table it wont boot.

Thanks in advance.

 

[Tradesman1]

With a 920, would prob be doing well to run 1600 and at that would have to be set manually, I'd try starting at 9-9-9-26 2T 1.5

 

[lloydy110]

With a 920, would prob be doing well to run 1600 and at that would have to be set manually, I'd try starting at 9-9-9-26 2T 1.5

Thanks for your advice... ive got alot to learn about the relationship between CPUs and RAM.
Im running those timmings you posted but not much improvement shown in CPU-Z (if it is reading it correctly).
Guess im just keeping my new RAM warm until i get a new mobo and cpu 😉