Question FX 6100 booting failure

[GHASTECHEN]

Some days ago i got a FX 6100, when i came home i mounted it to my Gigabyte 990FXA ud3, when i turned on the computer the PC booted and turned off, booted and turned off, when it went to the part of typing the password it allways go down, then i went to the BIOS and with some YouTube videos i turned on some settings i lowered my ram click etc etc etc
The max i go for my effort was typing my password enter my homescreen Open someting and reboot again, idk what the hell os this, but i tried a bit of everything, i checked my wires, changed ram position, used other GPU, etc
I sincerly ask tour help guys

 

[Crosslhs82x2]

I have the same mobo Version 4 running a 8350.
Have you tried a cmos reset?

 

[GHASTECHEN]

Not yet, i will

I have the same mobo Version 4 running a 8350.
Have you tried a cmos reset?

Not yet
I will try tô reset BIOS by CMOS
And wipe the BIOS and instal it again
Thx btw

 

[Crosslhs82x2]

Are you already on the last bios update we will ever see again?

If so unless you feel the bios is corrupted
All you should have to do is reset cmos and load defaults then save exit reboot.

 

[Groveling_Wyrm]

check your processor temperatures. Make sure it isn't overheating, as well.

 

[Crosslhs82x2]

What cpu cooler are you using?

 

[GHASTECHEN]

Are you already on the last bios update we will ever see again?

If so unless you feel the bios is corrupted
All you should have to do is reset cmos and load defaults then save exit reboot.

Is on the last update m8

 

[GHASTECHEN]

What cpu cooler are you using?

Im using a NOX HUMMER H-240 CL

 

[GHASTECHEN]

check your processor temperatures. Make sure it isn't overheating, as well.

I Will check it
Can it be due to the GPU i use, ir memory speed ir someting?
My Phenom II X4 955 runs ok in the current environment, same parts, specs, ONLY cpu change

 

[Crosslhs82x2]

What revision are you on I'm not seeing a m8.
I'm on revision 4 and f3 bios.

The bios for a phenom and a fx series could be vastly different and could be the reason.

The bios revision is located at the bottom left corner of the mobo.

 

[Crosslhs82x2]

From looking at the 5 different resisions
Cpu support list versus what bios shows

Rev 1 for phenom 3 different phenom cpu's shows bios f1.
For the fx6100 shows bios f3


On revision 1.2

Phenom shows bios FA
Fx6100 shows bios FB

On revision 3.0
Both CPU's bios FA

On revisions 4 and 4.1
Both cpu's show F2

You may have to put the phenom back in clearing cmos loading defaults boot up flash to new bios if different then what you have.
Shut down install the 6100 boot to bios and load defaults to get started.

 

[GHASTECHEN]

What revision are you on I'm not seeing a m8.
I'm on revision 4 and f3 bios.

The bios for a phenom and a fx series could be vastly different and could be the reason.

The bios revision is located at the bottom left corner of the mobo.

My mobo os rev 3.0

 

[GHASTECHEN]

From looking at the 5 different resisions
Cpu support list versus what bios shows

Rev 1 for phenom 3 different phenom cpu's shows bios f1.
For the fx6100 shows bios f3


On revision 1.2

Phenom shows bios FA
Fx6100 shows bios FB

On revision 3.0
Both CPU's bios FA

On revisions 4 and 4.1
Both cpu's show F2

You may have to put the phenom back in clearing cmos loading defaults boot up flash to new bios if different then what you have.
Shut down install the 6100 boot to bios and load defaults to get started.

In the website there are 4 BIOS
FDk, FC, FB AND FA.
Which One of those os the F3?

 

[GHASTECHEN]

From looking at the 5 different resisions
Cpu support list versus what bios shows

Rev 1 for phenom 3 different phenom cpu's shows bios f1.
For the fx6100 shows bios f3


On revision 1.2

Phenom shows bios FA
Fx6100 shows bios FB

On revision 3.0
Both CPU's bios FA

On revisions 4 and 4.1
Both cpu's show F2

You may have to put the phenom back in clearing cmos loading defaults boot up flash to new bios if different then what you have.
Shut down install the 6100 boot to bios and load defaults to get started.

Oh sorry

 

[Crosslhs82x2]

here is the cpu support list for Rev 3
Fa was the first bios for that mobo for you old cpu.
https://www.gigabyte.com/us/Motherboard/GA-990FXA-UD3-rev-30/support#support-cpu

for the 6100 it's the same as the phenom FA as first release.
https://www.gigabyte.com/us/Motherboard/GA-990FXA-UD3-rev-30/support#support-dl-bios
you could try FC next to the highest or last update as the last is beta.

 

[Crosslhs82x2]

You are seeing what i'm seeing except for the bios version that is on the mobo now.
Thats why i was saying you may need to reinstall the phenom and update the bios again then try the 6100 even though it's calling for the same bios for both cpu's.
Scratch Scratch OOOHHH that going to be a scab LO.

 

[GHASTECHEN]

You are seeing what i'm seeing except for the bios version that is on the mobo now.
Thats why i was saying you may need to reinstall the phenom and update the bios again then try the 6100 even though it's calling for the same bios for both cpu's.
Scratch Scratch OOOHHH that going to be a scab LO.

I have the Phenom and the FA BIOS on latter when i came home from work the FX Will be assembled
Thx for the help mate