Fx-6300 OC errors

[markus121]

Hi. So i have that oc issue. let me explain.
first my specs:
M5A97 r2.0
fx 6300
Corsair 2x4gb 1333mhz
trying to oc 4.3 or 4.4 ghz

I watched some guides and tried to overclock like them and got 2 problems with that.
1. when i set cpu offset voltage to 1.4, i got error message and could go to windows. that means it too high oor something?
but, also the second one:
If i oc without voltage, and it stays to 1.260-1.30 oc works but when testing it in OCCt i got error in core #3 with large data settings.

So my issues is causing that voltage. i got 500w power if that means anything. i just dont understand that vcore volts and nb volts and what is causing error.

anyone?

 

[Rocking Durgesh]

Which PSU you are using?

 

[markus121]

its working now! had to change settings little bit. now one thing is wondering. my core speed and voltages are always maxed. did something went wrong or is it right now?

 

[markus121]

i took a little google trip and find out i disabled my cool n quiet. well my Ai Overclock Tuner is set to manual what makes that cnq disappear 😀. pretty stuppid if i use example calculator my corespeed is maxed... weird

 

[Rocking Durgesh]

Friend first thing is that Don't pick directly any manual settings I mean any manual voltage and frequency. This will not get the system stable. . Overclocking is a step by Step method. Don't overclock by any software because overclocking is not the thing that can be done by software. First set the XMP memory profile enabled to set your RAM correctly. Then Go in BIOS and find the CPU clock ratio, this is the multiplier setting. It starts at a multi of A (some no.)x 100(BCLK)(normal factory settings) to give you A Gigahertz. So up it .5 at a time and boot to os and test with P95 for stability and monitor your temps. Do this for approximately 20 minutes. If it passes raise the multi another .5 and try again. You'll get to a point where either P95 won't pass or your temp will gone so high. If the temps gone high you'll have to stop and work on cooling. If P95 fails then go to the Advanced voltage section in bios and add some volts to the CPU VCore . Stay in offset and just add a bit by tapping on the "+" key and test again.
If your temp goes really high them you have to stop amd keep it to cooling. A step will arrive when your P95 never pass or temp immediately go high. Them youJane to stop overclocking and you get your extreme speed of your processor. ....