Fx 6300 turbo boost fps drop

[ashutoshmohapatra64]

So I decided to turn on the turbo boost for my fx 6300 and did a cinebench test with no throttling the CPU usage never went below 99 percent and I have a cooler master hyper 212 cooling it so everything seemed fine but I started a competitive match of csgo and saw my frames from time to time go from 200 to 60-70 and sometimes even lower but then when I press the esc key once or twice the fps goes back to normal I then disabled the turbo boost and then checked and everything worked fine. Does anyone know how to fix this I really wanted that 4ghz mark.

 

[SgtScream]

Other than the fact that you're running a very old cpu, check to see if the VRM's (motherboard) aren't overheating.

 

[ashutoshmohapatra64]

Other than the fact that you're running a very old cpu, check to see if the VRM's (motherboard) aren't overheating.

For now this CPU does just fine for 1080p gaming and btw gaming is all I do so this CPU does work I guess I will upgrade in 1,2 more years but what if the vrms are heating any solution for that?

 

[CaptainCretin]

To get the fx6300 stable you have to turn off auto overclock, Turbo mode, and a host of power saving options in the BIOS; and manually over clock it.

I got mine to 5.1GHz, but to be honest it still wasnt as good at games as my much older Phenom 2 1090T @3.7GHz, and eventually I went back to the 1090.

It also pulled a LOT of power, needed a Vcore boost to near the very limit (I had to boost Southbridge voltage and some others) and produced insane amounts of heat that even my watercooler struggled with.