Fx 6300 w/ Hyper D92 First OC advice

[Watermana]

I just got my D92 and started overclocking. I wanted to know if this was a particularly good chip and if my overclock is in the safe thermal/voltage limits (although I didn't touch the voltage yet)
The only thing I did was change the clock speed to 4.2 and give the NB a slight bump to 1.225v.

 

[Ecky]

Do you want to know if the FX-6300 is particularly good when compared with other, similarly priced CPUs, or if your particular FX-6300 is a good overclocker compared with other FX-6300's?

 

[Watermana]

Do you want to know if the FX-6300 is particularly good when compared with other, similarly priced CPUs, or if your particular FX-6300 is a good overclocker compared with other FX-6300's?

oops didn't mean to pick best answer, yes, I want to see if this chip is worth tuning and if the temps/volts are okay

 

[Ecky]

Your temps are within reason, and there's no way to know how far your CPU can be pushed until you push it. You'll find varying opinions about max safe voltage. Some will say as high as 1.6v as long as your cooling is good, while others are cautious about going past 1.4v.

 

[Watermana]

Your temps are within reason, and there's no way to know how far your CPU can be pushed until you push it. You'll find varying opinions about max safe voltage. Some will say as high as 1.6v as long as your cooling is good, while others are cautious about going past 1.4v.

Okay thanks, I was looking at other forums and got conflicting answers