FX 8320 Overclock

[AlexIord]

Hello i recently OCed my fx 8320
https://valid.x86.fr/i56690 here's the cpu-z, but even though ive set voltage at 1.284, it ramps up to 1.308 while validating, anyways. This is a pic from my recent bench on aida64 extreme http://
When i push it at 4.5 with 1.3v it crashes while ingame
Do you think i can push further?
Edit: zoom in the picture if its not clear

 

[0ldsch00l]

VIsheras can take up to 1.55v as long as cooled right, above that and it doesnt matter if you have it in an igloo, the transistors can not handle the overvoltage and will shorten life span by ten fold once you pass the "Safe" vcore limit

 

[AlexIord]

My temps were 39 on idle and 59 after 9 hours of aida64, and ive currently undervolted the cpu, stock was 1.39 when i installed it, and now it floats from 1.284 to 1.308 during load

 

[0ldsch00l]

I only see a need to undervolt on mining computers. If you want to push clockspeed you need to overvolt

 

[AlexIord]

only reason i seem to overvolt a cpu is when it crashes, doesnt boot, and etc with the problems, ive seen people undervolt and OC much better than this