FX 8350 Stock fan tempratures ?

[Vulmaro]

Hi, my pump of my seidon 120v's broken and I'm waiting for its repair so I have to use my stock cooler but tempratures are extremely high, My cpu is not overcloked all the votlage and clock speed is default, 60c at idle and 80c working and my fan's RPM is at maximum speed. Did I apply the thermal paste bad or Is the cooler worst than I think ? Only one shot has been left in my thermal paste. And also I can easily touch the heatsink, it's not hot that much than I expected. There is only normal amount of hotness

I hope I didn't shorten my cpu's life ?

Note: All my readings are from HWmonitor and it's TMPIN1 (TMPIN2 has nearly the same readings though. My Northbridge wouldn't heat that much as far I know)

Motherboard: 970a-ud3p

 

[rockie_]

80 degree Celsius is too much for FX 8350 . it must not go over 70 degree Celsius . Keep it below 65 .

 

[Nuckles_56]

Is the CPU currently overclocked?

 

[Vulmaro]

80 degree Celsius is too much for FX 8350 . it must not go over 70 degree Celsius

Is the CPU currently overclocked?

Yes It shouldn't get heat that much
and
It's at the stock speed as I mentioned in my thread

 

[rockie_]

Enable Normal clock profile from BIOS , if possible .

Try Real Temp or MSI-Afterburner for temp monitoring

 

[Vulmaro]

Enable Normal clock profile from BIOS , if possible .

Try Real Temp or MSI-Afterburner for temp monitoring

Temprature readings are still same I'm afraid

 

[Rybo]

Can you purchase more thermal compound from a local pc shop near you? I'd reccomend reinstalling the cooler with fresh compound and try it out. The stock cooler normally wont have it that hot.

 

[jaimelmiel]

Your core max temp is 61.1 degrees Celsius. Socket temp max should be 70 or so. this temp is not set in stone by
AMD.