Hey there, I just installed a new CPU+MOBO on my computer that had a major BIOS fault a week ago. I went from an FX8350 + 990XA-UD3 to a FX9590 + GA-990FX-Gaming, however I kept my CM 212 Evo as a cooler, with a total of 6 high speed system fans.
Making a clean install was not easy at all, as the PC got stuck at "Gigabyte logo" many times and only after several resets I was able to start W10 setup, from this point everything looked right until it was completed and all drivers installed.. Then it started randomly freezing, even if the CPU temperature isn't high enough for causing it (apparently, it sits at 40-60°C idle/load). However it expecially freeze when using Prime95 torture test, but sometimes even while in idle.
Any idea what could resolve the issue? I'm already changing the cooler to a liquid one, even if I'm skeptical it will do anything usefull to this problem.
---
CPU: FX-9590 (Stock 4,7-5,0 GHz)
MOBO: GA-990FX-Gaming
RAM: 4x8GB (32gb) HyperX DDR3 1866Mhz
SSD: Samsung 740 EVO (240gb)
HDD: WD10EZEX 1TB
PSU: EVGA SUPERNOVA 1000W P2 Platinum Rated
SO: Windows 10 64 bit Pro
Making a clean install was not easy at all, as the PC got stuck at "Gigabyte logo" many times and only after several resets I was able to start W10 setup, from this point everything looked right until it was completed and all drivers installed.. Then it started randomly freezing, even if the CPU temperature isn't high enough for causing it (apparently, it sits at 40-60°C idle/load). However it expecially freeze when using Prime95 torture test, but sometimes even while in idle.
Any idea what could resolve the issue? I'm already changing the cooler to a liquid one, even if I'm skeptical it will do anything usefull to this problem.
---
CPU: FX-9590 (Stock 4,7-5,0 GHz)
MOBO: GA-990FX-Gaming
RAM: 4x8GB (32gb) HyperX DDR3 1866Mhz
SSD: Samsung 740 EVO (240gb)
HDD: WD10EZEX 1TB
PSU: EVGA SUPERNOVA 1000W P2 Platinum Rated
SO: Windows 10 64 bit Pro